OEM-quality oil filter, OE number 021 115 562 A. Removes engine contaminants to protect internal components at every oil change interval.
$49.00
The 021115562A Oil Filter is an OEM-quality filtration component manufactured by Hengst, a trusted European OEM supplier. It removes contaminants from engine oil before they can circulate through critical lubrication passages. Because the oil filter operates continuously during engine operation, its filtration media must maintain consistent flow while trapping harmful particles.
Installing a quality 021115562A Oil Filter at every oil change helps protect internal engine components from accelerated wear.
Engine oil carries microscopic metal particles, combustion byproducts, and other contaminants generated during normal operation. Without proper filtration, these particles circulate through the engine and abrade metal-to-metal contact points. Consequently, bearings, camshafts, and other precision components wear prematurely.
Replace the 021115562A Oil Filter at every oil change interval. Additionally, inspect the lubrication system if you notice any of these concerns:
Oil pressure warning light or low-pressure fault codes.
Dark, heavily contaminated oil during a drain inspection.
Metallic particles visible in the drained oil.
Sludge buildup around the filter housing or drain plug area.
Reduced oil pressure readings during diagnostic testing.
An oil filter that is past its recommended service interval.
OE Part Number: 021 115 562 A
Function: Removes contaminants from engine oil to protect internal components.
Construction: High-efficiency filtration media with an integrated bypass valve.
Service: Designed for replacement at every engine oil change interval.
Previous Revision: 955 107 561 00
Always verify fitment by VIN before ordering. Use the correct oil specification and viscosity for the engine before installing the 021115562A Oil Filter. Furthermore, never reuse an old oil filter, as the internal bypass valve and filtration media are designed for single-service use.
Always verify fitment by VIN before ordering. Fitment depends on engine code, model year, oil system design, and original installed part number.
021 115 562 A
| Mfg Part # | 021115562A |
|---|
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000-2003 | Audi | A8 | 4.2L V8 | |
| 2007-2010 | Audi | Q7 | 3.6L V6 | |
| 2001-2003 | Audi | S8 | 4.2L V8 | |
| 2004-2006 | Porsche | Cayenne | 3.2L V6 | |
| 2008-2011 | Porsche | Cayenne | 3.6L V6 | |
| 1995-2002 | Volkswagen | Golf | 2.8L V6 | |
| 1995-2002 | Volkswagen | Jetta | 2.8L V6 | |
| 1996-1997 | Volkswagen | Passat | 2.8L V6 | |
| 2002-2004 | Volkswagen | Passat | 4.0L | |
| 2004-2006 | Volkswagen | Touareg | 3.2L V6 | |
| 2007-2010 | Volkswagen | Touareg | 3.6L V6 | |
| 2004-2006 | Volkswagen | Touareg | 4.2L V8 | |
| Audi | D2 A8 | 3.7 | Use vehicle selector to confirm fitment | |
| Audi | D2 A8 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | D2 S8 | D2 4.2L | Use vehicle selector to confirm fitment | |
| Audi | Q7 | V6 | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.2L | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.6L M55.01 | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.6L M55.02 | Use vehicle selector to confirm fitment | |
| Volkswagen | Eurovan T4 | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Golf IV | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Jetta IV | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Passat B5 | W8 | Use vehicle selector to confirm fitment | |
| Volkswagen | Phaeton | W12 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 1 | V6 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 2 | V6 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 3 | V6 | For vehicles with production date up to 05/31/2011 only |
The 06K 903 133AF is an OE-spec accessory drive belt tensioner assembly for select Volkswagen and Audi 2.0T applications. Engineered to factory specifications, this direct-fit replacement restores correct belt tension across all accessory drive components — no modifications required.
The 07K 903 315S is a Gates OE-quality A/C accessory belt tensioner for Volkswagen models equipped with the 2.5L 5-cylinder (BGP/BGQ) engine — including the Beetle, Golf, Jetta, Passat, and Rabbit. This tensioner maintains correct A/C belt tension through a durable spring mechanism and precision sealed pulley bearing, keeping belt-driven accessories running quietly and reliably without any modifications required.
Replacement engine oil pan for VR6 applications. Provides a secure reservoir for engine oil and ensures proper clearance for the oil pickup.
The 021 115 562A filter by Hengst is an OE-quality oil filter kit that prevents contaminants from damaging your engine, featuring a precision-fit cartridge and seal.
OEM-quality thermostat housing O-ring, OE number 021 121 119 A. Seals the thermostat housing, bypass pipe, and cooling sensor connections.
