Bosch 03368 distributor cap, OE reference 051 905 207. Provides accurate spark distribution for reliable ignition performance.
$39.99
The 03368 Distributor Cap is a Bosch OEM-quality ignition component designed to distribute spark from the ignition coil to each engine cylinder. It mounts on top of the distributor and directs electrical current through the correct terminal during each ignition cycle.
Accurate spark distribution supports clean combustion, smooth acceleration, and dependable engine operation. Bosch manufactured this replacement cap to provide an OEM-style fit and reliable electrical performance. Therefore, it is an ideal replacement for a worn, cracked, or damaged original cap.
The distributor cap is a key part of older distributor-based ignition systems. It works with the rotor, ignition coil, spark plug wires, and spark plugs to deliver spark at the correct time.
Over time, heat, vibration, moisture, and electrical arcing can wear the internal terminals. Consequently, the cap may develop cracks, carbon tracking, or corrosion. These issues can interrupt spark delivery and cause noticeable drivability problems.
Replacing the cap during ignition maintenance helps restore consistent performance. Furthermore, servicing related ignition components at the same time can help prevent future misfires.
Inspect the ignition system if you notice any of these common symptoms:
Rough or unstable engine idle.
Engine misfires during acceleration.
Hard starting, especially in damp conditions.
Reduced fuel economy.
Hesitation or loss of engine power.
Visible cracks on the cap housing.
Corrosion or burn marks on the internal terminals.
Carbon tracking inside the distributor cap.
Bosch Part Number: 03368
VW OE Reference: 051 905 207
Function: Distributes ignition spark to each cylinder.
Manufacturer: Bosch, a trusted OEM supplier.
Performance: Supports reliable combustion and smooth engine operation.
Fitment: Direct replacement design for applicable distributor systems.
Installation: Simple service procedure with no special tools typically required.
Always verify fitment by VIN before ordering. Before removing the old cap, label each spark plug wire. This step prevents wires from being installed in the wrong firing-order position.
Always verify fitment by VIN before ordering. Fitment depends on the engine code, ignition-system configuration, distributor type, and original installed part number.
Bosch 03368
| Weight | .40 lbs |
|---|---|
| Dimensions | 4 × 4 × 3 in |
| Mfg Part # | 03368 |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1995-2002 | Volkswagen | Cabrio | 2.0L | |
| 1991-1992, 1994, 1996-1998 | Volkswagen | Golf | 1.8L | |
| 1992, 1996-1999 | Volkswagen | Golf | 2.0L | |
| 1991-1995 | Volkswagen | Jetta | 1.8L | |
| 1993-1998 | Volkswagen | Jetta | 2.0L | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B3 | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | 2.0 | Use vehicle selector to confirm fitment |
The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi A4 B6 and B7 platform models. Furthermore, it manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — with an integrated level sensor included for a complete, plug-and-play installation.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Saleri Italo Water Pump 07K121011B is an OE-quality replacement for select Volkswagen engines. It restores reliable coolant circulation, keeps your engine at the correct operating temperature, and installs directly with no modifications required.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
