



Graf OEM-quality 037121010C Water Pump for Volkswagen 2.0L ABA engines. Includes sealing O-rings for a complete, leak-free installation.
$65.95
The 037121010C Water Pump is an OEM-quality replacement manufactured by Graf, a trusted supplier to the European automotive industry. This unit is responsible for circulating coolant through the engine block, cylinder head, and radiator to maintain stable operating temperatures. Because the 037121010C Water Pump operates continuously whenever the engine is running, its internal bearing, seal, and impeller must remain in excellent condition. Installing a fresh Graf unit restores factory coolant flow and protects the engine from heat-related damage.
Consistent coolant circulation is essential for engine longevity and performance. A worn pump may circulate coolant too slowly, causing localized hot spots in the cylinder head. Consequently, this can lead to head gasket failure, warped components, or a complete engine overheat. Furthermore, a failing bearing in the 037121010C Water Pump produces a grinding or whining noise that worsens over time. Therefore, replacing the pump at the first sign of wear prevents a minor service item from becoming a costly engine repair.
Inspect the pump and surrounding area if you notice any of the following symptoms:
A grinding, whining, or rumbling noise from the front of the engine.
Coolant seepage or dried residue around the pump housing or weep hole.
Overheating warnings or a temperature gauge that climbs above normal.
A loose or wobbling pulley when the engine is off and the belt is removed.
Coolant loss without a visible external hose or radiator leak.
A damaged or corroded impeller discovered during cooling system service.
OE Part Number: 037 121 010 C
Manufacturer: Graf (OEM-quality supplier).
Function: Circulates coolant through the engine and radiator to regulate temperature.
Components: Includes necessary sealing O-rings for a complete installation.
Construction: Durable housing with a high-strength impeller for long service life.
Fitment: Direct OEM replacement requiring no modifications.
Always verify fitment by VIN before ordering. When replacing the 037121010C Water Pump, it is strongly recommended to replace the drive belt, tensioner, and thermostat at the same time. Furthermore, inspect the coolant hoses and clamps for swelling or cracking while the system is open.
Always verify fitment by VIN before ordering. This pump is commonly used on Volkswagen 2.0L ABA gasoline engines.
037 121 010 C
037121010C
Graf PA-1001
026 121 010 A
| Weight | 4.8 lbs |
|---|---|
| Dimensions | 9 × 7 × 7 in |
| Mfg Part # | 037121010C |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1995-2002 | Volkswagen | Cabrio | 2.0L | |
| 1990-1992, 1995-1998 | Volkswagen | Golf | 1.8L | |
| 1990-1998 | Volkswagen | Golf | 2.0L | |
| 1990-1995 | Volkswagen | Jetta | 1.8T | |
| 1990-1999 | Volkswagen | Jetta | 2.0L | |
| 1990-1997 | Volkswagen | Passat | 1.8L | |
| 1993-1995 | Volkswagen | Passat | 2.0L | |
| Audi | 80 | 4cyl | Use vehicle selector to confirm fitment | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Corrado | G60 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf I | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf I | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta I | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta I | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B3 | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco I | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 8v | Use vehicle selector to confirm fitment |


The 07K 903 315S is a Gates OE-quality A/C accessory belt tensioner for Volkswagen models equipped with the 2.5L 5-cylinder (BGP/BGQ) engine — including the Beetle, Golf, Jetta, Passat, and Rabbit. This tensioner maintains correct A/C belt tension through a durable spring mechanism and precision sealed pulley bearing, keeping belt-driven accessories running quietly and reliably without any modifications required.


The 06H 121 119E thermostat housing o-ring is a factory Genuine OEM seal designed to provide a pressure-tight connection between the thermostat housing and the engine.


—Genuine 03L133821 Grommet (EGR Tube Adapter) designed for Volkswagen and Audi models. Restores the airtight seal between the EGR tube and intake for optimal engine efficiency.



Hengst OEM-quality oil filter, OE number 021 115 562 A. Removes engine contaminants to protect internal components at every oil change interval.