OEM-quality valve cover gasket set with upper and lower intake manifold gaskets for a complete valve cover service.
$23.95
The 037198025 Valve Cover Gasket set seals the valve cover to the top of the cylinder head. It helps keep engine oil inside the valvetrain area during normal operation. In addition, this service set includes upper and lower intake manifold gaskets.
The intake manifold must be removed to access the valve cover on applicable engines. Therefore, replacing the related manifold seals during the same repair helps avoid repeat labor. This OEM-quality set supports a clean, reliable installation.
The valve cover protects the camshaft, valves, and other upper-engine components from outside contamination. A properly sealed cover also prevents oil from escaping down the cylinder head or engine block.
Over time, heat cycles and oil exposure can harden the original gasket material. Consequently, the seal may flatten, crack, or lose its ability to contain oil. Addressing oil seepage early helps keep the engine bay cleaner and reduces the risk of burning-oil odors.
Inspect the upper engine area if you notice any of these common warning signs:
Oil seepage along the valve cover edge.
A greasy oil film running down the cylinder head.
A burning-oil smell after the engine reaches operating temperature.
Fresh oil on nearby hoses, wiring, or exhaust-side components.
Dirt buildup around the valve cover sealing surface.
A hardened, brittle, or flattened gasket during inspection.
Intake manifold gaskets that appear damaged during removal.
OE Part Number: 037 198 025
Function: Seals the valve cover to help prevent external oil leaks.
Included Components: Valve cover gasket, upper intake manifold gaskets, and lower intake manifold gaskets.
Service Benefit: Provides the necessary related seals for valve cover access.
Construction: OEM-quality materials for heat and oil resistance.
Installation: Designed for a precise fit on applicable engines.
Always verify fitment by VIN before ordering. Perform this repair only with a cool engine. First, remove the intake manifold following the manufacturer’s recommended procedure. Then, carefully remove the valve cover without damaging the sealing surface.
Always verify fitment by VIN before ordering. Fitment depends on the engine code, model year, intake manifold design, and original installed part number.
037 198 025
| Weight | .3 lbs |
|---|---|
| Dimensions | 12 × 8 × .3 in |
| Mfg Part # | 037198025 |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1998-2001 | Volkswagen | Beetle | 2.0L | |
| 1995-2002 | Volkswagen | Cabrio | 2.0L | |
| 1993-2000 | Volkswagen | Golf | 2.0L | |
| 1993-1998, 2000 | Volkswagen | Jetta | 1.8L | |
| 1993-2000 | Volkswagen | Jetta | 2.0L | |
| 1995-1996 | Volkswagen | Passat | 2.0L | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | 2.0 | Use vehicle selector to confirm fitment |
The 11 28 8 673 720 is an INA (Schaeffler) OEM-quality accessory belt deflection/idler pulley for BMW N55 TwinPower Turbo and S55 Twin Turbo engines across the F-series lineup — including the 3 Series, 4 Series, 5 Series, X3, X5, M3, and M4. This pulley guides the serpentine belt around the accessory drive and delivers quiet, stable belt tracking through a precision sealed bearing — with no modifications required.
The 07K 903 315S is a Gates OE-quality A/C accessory belt tensioner for Volkswagen models equipped with the 2.5L 5-cylinder (BGP/BGQ) engine — including the Beetle, Golf, Jetta, Passat, and Rabbit. This tensioner maintains correct A/C belt tension through a durable spring mechanism and precision sealed pulley bearing, keeping belt-driven accessories running quietly and reliably without any modifications required.
The 021 121 121A cover is a precision-fit thermostat housing lid that replaces brittle factory plastic to ensure a dependable, leak-free cooling system.
Replacement engine oil pan for VR6 applications. Provides a secure reservoir for engine oil and ensures proper clearance for the oil pickup.
Genuine 03H121145A Coolant Pipe (Inlet Flange) for select Volkswagen and Audi models. Ensures a secure, leak-free connection for your engine’s main cooling system.
