The Graf 06F 121 011 water pump is a precision-engineered OEM-spec replacement for select Volkswagen and Audi 4-cylinder FSI/TSI engines. Featuring a precision-cast housing, correct impeller design, and high-quality seal, this direct-fit pump restores factory coolant circulation with no modifications required.
$55.00
The Graf 06F 121 011 is an OEM-spec water pump engineered for select Volkswagen and Audi 4-cylinder FSI/TSI engines. Driven by the timing system, it continuously circulates coolant through the engine and radiator to maintain the correct operating temperature and prevent overheating.
Graf is a globally recognized OE cooling system supplier trusted by European automakers. As a result, the Graf 06F 121 011 matches the original factory component in every critical dimension — from the precision-cast housing to the correctly profiled impeller — ensuring factory-spec coolant circulation from day one.
A failing water pump shows recognizable symptoms early. The most common warning signs include coolant leaks from the weep hole or gasket surface, bearing noise, shaft play, and unexpectedly rising engine temperatures. Left unaddressed, a failing pump can lead to serious and costly engine damage. When these symptoms appear, replacing the unit immediately is the safest course of action.
OEM Reference: 06F 121 011
Brand: Graf — globally trusted OE cooling system supplier
Precision-cast housing for accurate, leak-free fitment
Correct impeller design for OE-spec coolant circulation
High-quality bearing and mechanical seal for quiet, long service life
Includes new sealing gasket
Direct-fit replacement — no modifications required
Refill with VW/Audi-approved G12++ or G13 coolant and bleed the cooling system after installation.
Inspect the timing belt, tensioner, and thermostat while servicing — many shops replace these components together to maximize labor efficiency and long-term reliability.
Always verify fitment by VIN before ordering. Engine code confirmation is recommended, as multiple variants may exist within the same model year.
Cross Reference
| Weight | 2.0 lbs |
|---|---|
| Dimensions | 7.0 × 5.0 × 6.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2006-2008 | Audi | A3 | 2.0L | |
| 2006 | Audi | A4 | 1.8L | |
| 2005-2009 | Audi | A4 | 2.0L | |
| 2008-2009 | Audi | TT | 2.0L | |
| 2009-2015 | Audi | TTS | 2.0L | |
| 2007-2009 | Volkswagen | EOS | 2.0L | |
| 2006-2008 | Volkswagen | GTI | 2.0L | |
| 2012-2013 | Volkswagen | Golf | 2.0L | |
| 2006-2008 | Volkswagen | Jetta | 2.0L | |
| 2006-2008 | Volkswagen | Passat | 2.0L |
The 06A 903 315 (Gates 38018) is an OE-quality accessory drive belt idler pulley for select Volkswagen and Audi applications. Engineered to OE dimensions with a premium sealed bearing, this direct-fit pulley restores correct belt alignment and quiet, smooth accessory drive operation no modifications required.
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
