The 06A 121 132AQ coolant flange by VAICO is an OE-quality direct-fit replacement for the VW New Beetle 1.8T, mounting on the back of the cylinder head. Includes seal ring for a complete, leak-free installation.
$21.00
The 06A 121 132AQ coolant flange by VAICO is an OE-quality replacement used on select Volkswagen New Beetle 1.8T applications. This multi-port coolant outlet flange mounts on the back side of the cylinder head and provides properly aligned connection points for the attached coolant hoses, helping distribute coolant between the engine, radiator, and heater circuit to maintain stable operating temperature. VAICO manufactures this component to OE specifications for a direct, reliable fit, and the part includes a seal ring for installation.
Coolant flanges are a common leak source as they age. Constant heat cycling and cooling system pressure cause the original plastic housing to become brittle, warp, or crack — leading to coolant seepage, dried coolant residue around the flange, low-coolant warnings, and potential overheating. Replacing the worn unit with VAICO 06A 121 132AQ restores a tight seal and dependable coolant flow.
Early signs of a failing coolant flange include visible coolant seepage or dried pink/orange residue around the flange body and hose connections on the back of the cylinder head. A persistent coolant odor after driving, unexplained drops in coolant reservoir level, or a low-coolant warning light are additional indicators. In advanced cases, a cracked or warped housing can cause sudden coolant loss and rapid engine overheating. Prompt replacement prevents further damage and protects the engine from heat-related failure.
OEM Reference: 06A 121 132AQ; also replaces 06A 121 132H
Brand: VAICO — OE-quality German replacement supplier
Mounts on the back side of the cylinder head for correct positioning
Multi-port design for proper coolant routing and hose alignment
Heat- and coolant-resistant composite construction
Precision-molded ports for a secure, leak-free hose interface
Includes seal ring for installation
Install the included seal ring during assembly and replace any related sensor O-rings at the same time. Use new hose clamps if the originals are weak or corroded. After installation, refill with VW/Audi-approved coolant and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
06A 121 132AQ
06A 121 132H
VAICO V10-2955
Motorad CH-6102
IMC 119 54036 001
IMC 119 54036 738
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 7.0 × 6.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1999-2005 | Volkswagen | Beetle | 1.8T |
The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi A4 B6 and B7 platform models. Furthermore, it manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — with an integrated level sensor included for a complete, plug-and-play installation.
The 06K 121 143 is an OE-spec coolant hose adapter for select Volkswagen and Audi EA888 1.8T and 2.0T applications. Precision-molded to factory specifications, this direct-fit replacement restores a factory-tight seal at critical coolant junctions — no modifications required. Includes O-ring.
The 03L 145 276 is an OE-quality accessory belt idler pulley for select Volkswagen and Audi 2.0 TDI applications. Built to factory dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and quiet accessory drive operation — no modifications required.
The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.
The 5N0 122 291C is an OE-style lower radiator coolant hose adapter by VIKA, engineered for the VW Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. Positioned at the front lower radiator hose junction, this coupling piece connects the lower coolant hose to the radiator outlet port, completing the primary cooling circuit return path. It serves as a cost-effective alternative to the Genuine VW lower adapter. Always confirm fitment by VIN before ordering.
