The 06A 121 132R coolant flange by Febi Bilstein is an OE-quality direct-fit replacement for select Volkswagen vehicles. It delivers correct fit, reliable sealing, and durable construction with no modifications required.
$12.00
The 06A 121 132R coolant flange by Febi Bilstein is an OE-quality replacement component used on select Volkswagen applications. This housing serves as a key junction in the cooling system, providing secure hose connection points and proper coolant routing to help maintain stable engine operating temperature. A reliable seal at this location is essential for consistent coolant circulation and effective temperature regulation under all driving conditions.
Because the flange is exposed to constant heat cycling and pressurized coolant, the original plastic housing can become brittle, warp, or crack over time. This typically leads to coolant seepage, dried residue around the housing, low-coolant warnings, and eventual overheating risk. Replacing the worn unit with the Febi Bilstein 06A 121 132R restores a reliable seal and dependable cooling system performance.
A failing coolant flange produces clear warning signs that worsen if left unaddressed. The most common indicators include visible coolant leaks or dried residue around the flange housing, a persistent coolant smell from the engine bay after operation, and unexplained drops in coolant level without an obvious external source. An overheating engine or a temperature warning light on the dashboard can also signal that coolant flow is being disrupted by a compromised flange. Physical inspection may reveal a cracked, brittle, or visibly warped housing. Prompt replacement prevents coolant loss and the risk of engine damage from overheating.
OEM Reference: 06A 121 132R
Brand: Febi Bilstein — global OE-quality aftermarket supplier, products meet or exceed OE standards
OE-style housing design for correct fit, mounting alignment, and hose routing
Heat- and coolant-resistant composite construction
Precision-molded ports for secure, leak-free hose connections
Replace the flange O-ring and all related seals at installation — do not reuse the originals. Inspect all connected coolant hoses for softness, swelling, or cracking and replace if needed. Use new hose clamps if the originals show corrosion or weakness. After installation, refill with the VW/Audi-approved coolant mixture and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
06A 121 132R
Febi Bilstein 29888
TOPRAN 110 364
SWAG 30 92 9888
VAICO V10-2164
MEYLE 100 226 0019
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 7.0 × 6.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2011-2015 | Volkswagen | Jetta |
The 022 145 276F is an INA (Schaeffler) OE-quality accessory belt tensioner pulley for select Volkswagen and Audi 3.2L and 3.6L VR6 applications. Built to factory profile with a precision sealed bearing, this direct-fit pulley restores correct belt tracking and quiet operation across the accessory drive — no modifications required.
The 5Q0 122 291AC is the OE right-side coolant bypass line adapter (T-piece) used on select 2018–2023 Volkswagen and Audi MQB-platform vehicles equipped with a 2.0L engine and manual transmission. Positioned on the passenger side of the cooling circuit, it serves as the outlet adapter for the cooling system bypass line — a distinct application from the central water pump connectors used on the same platform. Always confirm fitment by VIN before ordering, as this part is transmission-specific.
The 5N0 122 291C is an OE-style lower radiator coolant hose adapter by VIKA, engineered for the VW Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. Positioned at the front lower radiator hose junction, this coupling piece connects the lower coolant hose to the radiator outlet port, completing the primary cooling circuit return path. It serves as a cost-effective alternative to the Genuine VW lower adapter. Always confirm fitment by VIN before ordering.
The Graf 06A 121 012G is an OE-quality timing-belt-driven water pump for select Volkswagen and Audi 1.8T and 2.0 engines. Built for direct installation with no modifications required.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
