The 06A 121 132 flange by URO Parts is an OE-style coolant hose flange for select Volkswagen and Audi vehicles. It restores leak-free coolant routing with a direct bolt-on fit and no modifications required.
$9.99
The 06A 121 132 flange by URO Parts is an OE-style replacement coolant hose flange for select Volkswagen and Audi vehicles equipped with the 1.8T four-cylinder engine. Mounted at the cylinder head, this multi-port flange provides correctly aligned connection points for coolant hoses, routing coolant between the engine, radiator circuit, and heater system to maintain stable operating temperature throughout operation. URO Parts manufactures this flange to OE dimensions — offering reliable European replacement parts as an alternative to the OEM dealer component.
Plastic coolant flanges are one of the most common leak points on these platforms due to constant heat cycling and cooling system pressure. Over time, the housing becomes brittle, warps, or cracks — leading to coolant seepage, low coolant warnings, and the risk of overheating. Replacing the worn unit with this 06A 121 132 flange from URO Parts restores leak-free sealing and dependable coolant circulation.
A failing coolant hose flange will show warning signs that should not be ignored. The most common indicators include visible coolant seepage or dripping near the cylinder head area, a persistent coolant odor from the engine bay after operation, and a low coolant warning light with no obvious external source. Physical inspection may reveal a cracked housing or deteriorated sealing surfaces around the flange ports. Left unaddressed, a leaking flange leads to progressive coolant loss, unstable engine temperature, reduced heater performance, and the risk of engine overheating.
OEM Reference: 06A 121 132
Brand: URO Parts — quality OE-style European replacement
High-quality molded construction — resists warping and cracking
Manufactured to OE dimensions for correct fit, port alignment, and hose routing
Includes O-ring for a complete, ready-to-install repair
Replace the included O-ring at installation — do not reuse the original seal. Inspect all connected coolant hoses for swelling, softness, or cracking and replace if needed. Use new hose clamps if the originals show signs of corrosion or weakness. Torque all fasteners to factory specification to avoid distorting the sealing surface. After installation, refill with the VW/Audi-approved coolant mixture and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
06A 121 132A
06A 121 132B
06A 121 132C
06A 121 132Q
BECK ARNLEY: 147-0013
Dorman: 902-707
Gates: CO34750
VAICO: V10-0560
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 7.0 × 6.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1999-2006 | Volkswagen | Golf | 2.0L | |
| 1999-2005 | Volkswagen | Jetta | 2.0L |
The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi A4 B6 and B7 platform models. Furthermore, it manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — with an integrated level sensor included for a complete, plug-and-play installation.
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Graf VW Water Pump 026 121 005H is an OE-quality belt-driven replacement for select Volkswagen and Audi 4-cylinder engines. Built for direct installation with no modifications required.
