The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi A4 B6 and B7 platform models. Furthermore, it manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — with an integrated level sensor included for a complete, plug-and-play installation.
$18.00
The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style replacement engineered to restore dependable cooling system performance on Audi A4 B6 and B7 platform vehicles. Specifically, this tank performs three critical functions within the cooling circuit — it accommodates thermal expansion and contraction of coolant, maintains correct system pressure, and provides the primary fill point for the entire system. Additionally, this unit includes the integrated coolant level sensor, so the complete assembly installs directly without sourcing additional components. Because the Meyle 8E0 121 403 Coolant Tank is engineered to OEM dimensions, it fits using factory hose connections and mounting points without any modifications required.
Expansion tank failures follow predictable patterns, so recognizing the early warning signs helps prevent serious engine damage. First, a recurring low-coolant warning — even after refilling — strongly indicates a slow leak from the tank body or seam. Furthermore, coolant puddles or dried residue beneath the front of the engine bay confirm active seepage. A persistent sweet coolant odor after driving is another reliable indicator. Moreover, original tanks on B6 and B7 platform vehicles commonly become brittle or develop stress cracks from prolonged heat exposure and pressure cycling. In addition, a failed level sensor may trigger a false low-coolant warning even when the system is full. In more advanced cases, air enters the cooling circuit through the compromised tank, and consequently the engine runs hotter than normal.
OEM Reference: 8E0 121 403
Brand: Meyle — trusted European OE-quality replacement parts manufacturer
Includes integrated coolant level sensor for plug-and-play installation
Direct bolt-on fitment using factory hose connections and mounting points
Correct tank geometry for proper B6/B7 platform cooling circuit integration
Engineered to restore proper system pressure and coolant volume control
Before installation, confirm that all hose port positions and the sensor connector on the new tank match those on the original unit. Next, fill the tank to the MAX mark using approved Audi G12, G12+, or G12++ coolant only — never mix coolant types, as doing so degrades inhibitor chemistry and accelerates internal corrosion. After filling, run the engine to operating temperature with the cabin heater set to full heat, then recheck the coolant level once the system cools completely. Moreover, inspect all coolant hoses and clamps during this service and replace any that show cracking, softness, or swelling. Finally, verify that the level sensor connector is fully seated and clear any stored coolant-level fault codes before returning the vehicle to service.
Always verify fitment by VIN before ordering.
Cross Reference Numbers
8E0 121 403 A
8E0 121 403 F
| Weight | 1.1 lbs |
|---|---|
| Dimensions | 11 × 9 × 7 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2002-2008 | Audi | A4 | 1.8L | |
| 2005 | Audi | A4 | 2.0L | |
| 2006-2008 | Audi | A4 | 3.2L V6 | |
| 2002, 2004 | Audi | A6 | 3.0L V6 |
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.
The 5N0 122 291C is an OE-style lower radiator coolant hose adapter by VIKA, engineered for the VW Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. Positioned at the front lower radiator hose junction, this coupling piece connects the lower coolant hose to the radiator outlet port, completing the primary cooling circuit return path. It serves as a cost-effective alternative to the Genuine VW lower adapter. Always confirm fitment by VIN before ordering.
The ABS Speed Sensor WHT 003 858B by German Service Tech is an OE-style replacement for select Volkswagen and Audi models. Built for plug-and-play installation with no modifications required.
The Graf VW Water Pump 026 121 005H is an OE-quality belt-driven replacement for select Volkswagen and Audi 4-cylinder engines. Built for direct installation with no modifications required.
