Hengst OEM-quality oil filter, OE number 021 115 562 A. Removes engine contaminants to protect internal components at every oil change interval.
$13.00
The 021115562A Oil Filter is an OEM-quality filtration component manufactured by Hengst, a trusted European OEM supplier. It removes contaminants from engine oil before they can circulate through critical lubrication passages. Because the oil filter operates continuously during engine operation, its filtration media must maintain consistent flow while trapping harmful particles.
Installing a quality 021115562A Oil Filter at every oil change helps protect internal engine components from accelerated wear. Hengst filters are built to meet OEM specifications for flow rate, filtration efficiency, and bypass valve performance.
Engine oil carries microscopic metal particles, combustion byproducts, and other contaminants generated during normal operation. Without proper filtration, these particles circulate through the engine and abrade metal-to-metal contact points. Consequently, bearings, camshafts, and other precision components wear prematurely.
Replace the 021115562A Oil Filter at every oil change interval. Additionally, inspect the lubrication system if you notice any of these concerns:
Oil pressure warning light or low-pressure fault codes.
Dark, heavily contaminated oil during a drain inspection.
Metallic particles visible in the drained oil.
Sludge buildup around the filter housing or drain plug area.
Reduced oil pressure readings during diagnostic testing.
An oil filter that is past its recommended service interval.
OE Part Number: 021 115 562 A
Function: Removes contaminants from engine oil to protect internal components.
Construction: High-efficiency filtration media with an integrated bypass valve.
Service: Designed for replacement at every engine oil change interval.
Previous Revision: 955 107 561 00
Always verify fitment by VIN before ordering. Use the correct oil specification and viscosity for the engine before installing the 021115562A Oil Filter. Furthermore, never reuse an old oil filter, as the internal bypass valve and filtration media are designed for single-service use.
Always verify fitment by VIN before ordering. Fitment depends on engine code, model year, oil system design, and original installed part number.
021 115 562 A
| Mfg Part # | 021115562A |
|---|
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000-2003 | Audi | A8 | 4.2L V8 | |
| 2007-2010 | Audi | Q7 | 3.6L V6 | |
| 2001-2003 | Audi | S8 | 4.2L V8 | |
| 2004-2006 | Porsche | Cayenne | 3.2L V6 | |
| 2008-2011 | Porsche | Cayenne | 3.6L V6 | |
| 1996-2002 | Volkswagen | Golf | 2.8L V6 | |
| 1996-2002 | Volkswagen | Jetta | 2.8L V6 | |
| 1996-1997 | Volkswagen | Passat | 2.8L V6 | |
| 2002-2004 | Volkswagen | Passat | 4.0L | |
| 2004-2006 | Volkswagen | Touareg | 3.2L V6 | |
| 2007-2011 | Volkswagen | Touareg | 3.6L V6 | |
| 2004-2006 | Volkswagen | Touareg | 4.2L V8 | |
| Audi | D2 A8 | 3.7 | Use vehicle selector to confirm fitment | |
| Audi | D2 A8 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | D2 S8 | D2 4.2L | Use vehicle selector to confirm fitment | |
| Audi | Q7 | V6 | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.2L | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.6L M55.01 | Use vehicle selector to confirm fitment | |
| Porsche | Cayenne | V6 3.6L M55.02 | Use vehicle selector to confirm fitment | |
| Volkswagen | Eurovan T4 | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Golf IV | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Jetta IV | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | VR6 12v | For vehicles from model year 1996 only | |
| Volkswagen | Passat B5 | W8 | Use vehicle selector to confirm fitment | |
| Volkswagen | Phaeton | W12 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 1 | V6 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 2 | V6 | Use vehicle selector to confirm fitment | |
| Volkswagen | Touareg 3 | V6 | For vehicles with production date up to 05/31/2011 only |
The 06H 121 119E thermostat housing o-ring is a factory Genuine OEM seal designed to provide a pressure-tight connection between the thermostat housing and the engine.
The 021 109 507A tensioner is an OE-style upper timing chain guide that supports the chain, controls excess movement, and helps maintain accurate engine timing.
Replacement 049109111C Camshaft Gear for select Volkswagen and Audi engines. Ensures accurate camshaft-to-crankshaft synchronization and reliable valve timing.
OEM-quality oil filter, OE number 021 115 562 A. Removes engine contaminants to protect internal components at every oil change interval.
