Bosch 03368 distributor cap, OE reference 051 905 207. Provides accurate spark distribution for reliable ignition performance.
$52.00
Out of stock
The 03368 Distributor Cap is a Bosch OEM-quality ignition component designed to distribute spark from the ignition coil to each engine cylinder. It mounts on top of the distributor and directs electrical current through the correct terminal during each ignition cycle.
Accurate spark distribution supports clean combustion, smooth acceleration, and dependable engine operation. Bosch manufactured this replacement cap to provide an OEM-style fit and reliable electrical performance. Therefore, it is an ideal replacement for a worn, cracked, or damaged original cap.
The distributor cap is a key part of older distributor-based ignition systems. It works with the rotor, ignition coil, spark plug wires, and spark plugs to deliver spark at the correct time.
Over time, heat, vibration, moisture, and electrical arcing can wear the internal terminals. Consequently, the cap may develop cracks, carbon tracking, or corrosion. These issues can interrupt spark delivery and cause noticeable drivability problems.
Replacing the cap during ignition maintenance helps restore consistent performance. Furthermore, servicing related ignition components at the same time can help prevent future misfires.
Inspect the ignition system if you notice any of these common symptoms:
Rough or unstable engine idle.
Engine misfires during acceleration.
Hard starting, especially in damp conditions.
Reduced fuel economy.
Hesitation or loss of engine power.
Visible cracks on the cap housing.
Corrosion or burn marks on the internal terminals.
Carbon tracking inside the distributor cap.
Bosch Part Number: 03368
VW OE Reference: 051 905 207
Function: Distributes ignition spark to each cylinder.
Manufacturer: Bosch, a trusted OEM supplier.
Performance: Supports reliable combustion and smooth engine operation.
Fitment: Direct replacement design for applicable distributor systems.
Installation: Simple service procedure with no special tools typically required.
Always verify fitment by VIN before ordering. Before removing the old cap, label each spark plug wire. This step prevents wires from being installed in the wrong firing-order position.
Always verify fitment by VIN before ordering. Fitment depends on the engine code, ignition-system configuration, distributor type, and original installed part number.
Bosch 03368
| Weight | .40 lbs |
|---|---|
| Dimensions | 4 × 4 × 3 in |
| Mfg Part # | 03368 |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1995-2002 | Volkswagen | Cabrio | 2.0L | |
| 1991-1992, 1994, 1996-1998 | Volkswagen | Golf | 1.8L | |
| 1992, 1996-1999 | Volkswagen | Golf | 2.0L | |
| 1991-1995 | Volkswagen | Jetta | 1.8L | |
| 1993-1998 | Volkswagen | Jetta | 2.0L | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B3 | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | 2.0 | Use vehicle selector to confirm fitment |
The 03L 145 276 is an OE-quality accessory belt idler pulley for select Volkswagen and Audi 2.0 TDI applications. Built to factory dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and quiet accessory drive operation — no modifications required.
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
The Graf 06H 121 026ED Water Pump and thermostat assembly is an OE-spec integrated cooling module featuring a robust aluminum housing engineered for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. The aluminum construction eliminates the warping and cracking common to original plastic designs, restoring factory-spec coolant circulation and precise temperature regulation. Includes all required O-rings and seals for a complete installation.
