OEM-quality 037121121A thermostat to water pump housing with sealing O-ring. Helps restore a secure coolant connection and prevent cooling system leaks.
$8.00
The 037121121A Thermostat Housing is an OEM-quality cooling system component that connects the thermostat area to the water pump housing. It provides a sealed path for coolant as it circulates through the engine. Consequently, it helps the cooling system maintain stable operating temperatures and protect vital engine components.
Heat, pressure, and repeated temperature changes can weaken the original housing over time. Plastic housings may crack, warp, or lose their sealing surface. Therefore, replacing a damaged housing helps prevent coolant loss, warning lights, and overheating concerns. This replacement includes a sealing O-ring for proper installation.
The thermostat housing directs coolant between key engine cooling passages. It must maintain a reliable seal while the engine heats up and cools down. However, even a small leak can lower coolant levels and reduce cooling system performance.
Furthermore, coolant leaks can leave residue around the housing or nearby hoses. If ignored, coolant loss may eventually lead to overheating and engine damage. Replacing the housing restores a secure connection and supports proper coolant circulation.
Check the cooling system if you notice any of the following symptoms:
Coolant residue near the thermostat or water pump area.
A sweet coolant smell from the engine bay.
Low coolant level warnings on the instrument cluster.
Visible cracks, warping, or damage on the housing.
Coolant puddles beneath the vehicle.
Engine temperature rising above its normal range.
Frequent need to add coolant without an obvious hose leak.
OE Part Number: 037 121 121 A
Function: Connects the thermostat area and water pump housing.
Seal Included: Includes a sealing O-ring for installation.
Construction: Heat-resistant material for demanding cooling system conditions.
Fitment: OEM-quality replacement designed for a direct installation.
Protection: Helps prevent coolant leaks and overheating-related damage.
Always verify fitment by VIN before ordering. Only service the cooling system when the engine is completely cool. Hot coolant is pressurized and can cause serious injury.
Always verify fitment by VIN before ordering. Exact vehicle applications can vary by engine code, production date, and cooling system configuration.
037 121 121 A
| Weight | .20 lbs |
|---|---|
| Dimensions | 4 × 3 × 3 in |
| Mfg Part # | 037121121A |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1995-2002 | Volkswagen | Cabrio | 1.8L | |
| 1994-1999 | Volkswagen | Golf | 1.8L | |
| 1993-1998 | Volkswagen | Jetta | 1.8L | |
| 1997-1998 | Volkswagen | Jetta | 1.9L | |
| 1993-1996 | Volkswagen | Passat | 2.0L | |
| Audi | 80 | 4 Cylinder | Use vehicle selector to confirm fitment | |
| Audi | 80 | 4cyl | Use vehicle selector to confirm fitment | |
| Volkswagen | Corrado | G60 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B3 | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 8v | Use vehicle selector to confirm fitment |
The 11 28 8 673 720 is an INA (Schaeffler) OEM-quality accessory belt deflection/idler pulley for BMW N55 TwinPower Turbo and S55 Twin Turbo engines across the F-series lineup — including the 3 Series, 4 Series, 5 Series, X3, X5, M3, and M4. This pulley guides the serpentine belt around the accessory drive and delivers quiet, stable belt tracking through a precision sealed bearing — with no modifications required.
Genuine Elring 038121119B Thermostat O-Ring. Prevents coolant leaks and ensures proper operation of your Volkswagen or Audi cooling system.
OEM-quality oil cooler O-ring for the connection between the oil cooler and oil filter adapter. Replace during oil cooler service.
Maximizes flow for stock turbochargers or future upgraded turbochargers thanks to a removable adapter
Victor Reinz OEM-quality thermostat housing O-ring, OE number 021 121 119 A. Prevents coolant leaks at the thermostat housing and engine block connection.
