





Thermostat with sealing O-ring for select Volkswagen and Audi 1.8L turbo and 2.0L engines. Supports correct coolant flow.
$14.99
The 050 121 113C thermostat controls coolant flow as the engine warms up. When the engine is cold, it stays closed and helps the engine reach operating temperature efficiently. Then, at approximately 87°C, it opens and allows coolant to circulate through the engine and radiator.
This thermostat supports stable engine temperature under normal driving conditions. It includes the required sealing O-ring for installation.
The cooling system depends on correct coolant flow. A thermostat that sticks closed restricts circulation. Consequently, the engine can overheat and the heater may produce little or no warm air.
Conversely, a thermostat that sticks open lets coolant circulate too early. As a result, the engine may take longer to warm up or may not reach its intended operating temperature. This condition can affect heater performance and engine efficiency.
Replacing a faulty thermostat helps restore correct temperature control. It also supports reliable coolant circulation during daily operation.
Inspect the cooling system if you notice:
Engine overheating or an elevated temperature gauge reading.
Little or no warm air from the cabin heater.
Slow engine warm-up.
The engine temperature remains below its normal range.
Coolant residue around the thermostat housing.
A check-engine light related to coolant-temperature operation.
OE Part Number: 050 121 113 C
Opening Temperature: 87°C
Function: Regulates coolant flow based on engine temperature.
Seal Included: Includes the required O-ring.
Fitment Type: Direct replacement for compatible cooling-system applications.
Service Purpose: Replaces a thermostat that sticks open, sticks closed, or operates inconsistently.
Always verify fitment by VIN before ordering. Start service only after the engine cools completely. Coolant loss occurs during thermostat replacement, so collect and replace fluid with the correct vehicle-specified coolant.
Always verify fitment by VIN before ordering.
050 121 113 C
| Weight | .20 lbs |
|---|---|
| Dimensions | 3 × 3 × 2 in |
| Mfg Part # | 050121113C |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000-2001, 2010-2013 | Audi | A3 | 1.8L | |
| 2010-2013 | Audi | A3 | 2.0L | |
| 1997-2001 | Audi | A4 | 1.8L | |
| 2000-2006 | Audi | TT | 1.8L | |
| 2000-2006 | Audi | TT | 3.2L VR6 | |
| 1998-2005 | Volkswagen | Beetle | 1.8L | |
| 1998-2005 | Volkswagen | Beetle | 2.0L | |
| 2006-2007 | Volkswagen | GTI | 2.0L | |
| 1999-2006 | Volkswagen | Golf | 1.8L | |
| 1999-2006 | Volkswagen | Golf | 2.0L | |
| 2011-2013 | Volkswagen | Golf | 2.0L TDI | |
| 2000-2005 | Volkswagen | Jetta | 1.8L | |
| 2006-2012 | Volkswagen | Jetta | 2.0L | |
| 1998-2005 | Volkswagen | Passat | 1.8L | |
| Audi | B5 A4 | 1.8T | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 180HP | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 225HP | Use vehicle selector to confirm fitment | |
| Volkswagen | 337/20AE | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV GLI | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta VI | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta VI | 2.0L | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B5 | 1.8T | Use vehicle selector to confirm fitment |


The 06J 903 133D is a Mubea OEM-quality accessory drive belt tensioner for Volkswagen and Audi models powered by the 2.0L TSI EA888 engine (CBFA/CCTA) — including the GTI, Jetta GLI, Passat, CC, Eos, Tiguan, Beetle Turbo, Audi A3, TT, and Q3. This tensioner maintains correct serpentine belt tension through a precision spring mechanism and sealed pulley bearing, restoring quiet, reliable accessory drive performance with no modifications required.


The 06H 121 119E thermostat housing o-ring is a factory Genuine OEM seal designed to provide a pressure-tight connection between the thermostat housing and the engine.


The 021 103 601B pan is a stamped-steel, OE-style replacement oil sump for select Volkswagen VR6 engines. It restores proper oil containment and lower-engine protection.



Hengst OEM-quality oil filter, OE number 021 115 562 A. Removes engine contaminants to protect internal components at every oil change interval.