OEM-quality 1.8 bar (White) oil pressure switch designed to provide accurate high-pressure monitoring and protect vital engine components from lubrication failure.
$3.64
The 056 919 081E oil pressure switch is a high-pressure monitoring sensor integrated into the engine’s lubrication safety circuit. Rated at 1.8 bar, this switch acts as a critical checkpoint for the engine control unit (ECU) and the instrument cluster, ensuring that oil pressure remains within the safe operating range at higher engine speeds.
Lubrication is the lifeblood of your engine, and maintaining accurate pressure is essential to prevent metal-on-metal contact. This sensor provides a reliable electrical signal that triggers a warning if the lubrication system fails to meet the required 1.8 bar threshold, allowing you to take action before damage occurs.
The primary function of the 056 919 081E oil pressure switch is to safeguard the engine against catastrophic failure. In many classic European engine configurations, this sensor is part of a dynamic oil pressure monitoring system. It works alongside a low-pressure switch to provide comprehensive coverage across the entire RPM range.
Replacing a malfunctioning or leaking switch is vital for maintaining the integrity of your diagnostics. A new OEM-quality unit ensures that your dashboard warnings are accurate, protecting you from false alarms while guaranteeing that a real pressure loss will be detected immediately.
Keep an eye on your vehicle’s monitoring system for these common symptoms of a failed sensor:
The oil pressure warning light flashes or stays on while driving.
An audible warning buzzer sounds at engine speeds above 2,000 RPM.
Oil is leaking from the electrical connector or the sensor body.
The gauge displays a pressure reading when the ignition is on but the engine is off.
Intermittent warnings that disappear and reappear without changes in oil level.
A simple diagnostic test can verify the part’s condition: if the instrument cluster shows oil pressure before the engine has even started, the internal diaphragm or contact is likely defective. Replacing the unit restores a reliable baseline for your oil system readings.
OE Part Number: 056 919 081 E
Pressure Rating: 1.8 bar (approx. 26.1 PSI).
Physical Specifications: 1-pin electrical connection, M10 x 1 thread.
Color Coding: Typically features white housing for easy identification.
Function: Monitors the high-pressure side of the lubrication system.
Direct Replacement: Engineered to factory specifications for a perfect thread-in fit.
Quality Standard: Constructed with heat-resistant materials for durability in the engine bay.
Always verify fitment by VIN before ordering.
056 919 081 E
| Weight | .05 lbs |
|---|---|
| Dimensions | 2 × 1.5 × 1.5 in |
| Mfg Part # | 056919081E |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| Audi | 100 | 5cyl | Use vehicle selector to confirm fitment | |
| Audi | 200 | 10v T | Use vehicle selector to confirm fitment | |
| Audi | 200 | 20v T | Use vehicle selector to confirm fitment | |
| Audi | 80 | 4cyl | Use vehicle selector to confirm fitment | |
| Audi | 80 | 5cyl | Use vehicle selector to confirm fitment | |
| Audi | 80 | 5 Cylinder | From VIN 89-K-000001 To VIN 89-K-267000, Split is in the 1989 model year | |
| Audi | 90 | 10v | Use vehicle selector to confirm fitment | |
| Audi | 90 | 20v | Use vehicle selector to confirm fitment | |
| Audi | 90 | 5 Cylinder | From VIN 89-K-000001 To VIN 89-K-267000, Split is in the 1989 model year | |
| Audi | C4 S4 | 20v T | AAN Engine Code Only | |
| Audi | C4 S6 | 20v T | AAN Engine Code Only | |
| Audi | D2 A8 | 3.7 | Use vehicle selector to confirm fitment | |
| Audi | D2 A8 | 4.2 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment |
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.
The Borsehung ABS Speed Sensor WHT003856 delivers precise wheel-speed data to your ABS, ESP, and traction control systems. This plug-and-play, OE-quality replacement fits select Audi and Volkswagen models — restoring factory braking performance quickly and reliably.
Manifold absolute pressure sensor, lets your ECU know how much air pressure is in your intake manifold / supercharger
Brand new unit without core charge
