OE-style engine vacuum suction pump that supports crankcase ventilation and helps control pressure through connected vacuum lines.
$30.00
The 058 133 753D suction pump is an engine-vacuum component that supports crankcase ventilation and vacuum-system operation. It uses an internal check-valve arrangement to help direct vacuum correctly through connected lines.
When the pump becomes restricted, cracked, or otherwise fails, crankcase pressure can rise beyond its intended operating range. This condition may contribute to oil seepage at seals, hose failures, and reduced engine reliability.
Proper crankcase ventilation helps manage pressure created during engine operation. The suction pump supports this process by maintaining the intended vacuum path and preventing undesired backflow through the connected vacuum circuits.
A correctly functioning pump helps protect hoses, seals, and related crankcase-ventilation components from excess pressure. Replacing a failed unit early can help address oil-leak concerns and restore proper vacuum-system function.
Inspect the vacuum system if you notice any of the following:
Oil seepage around engine seals or gaskets.
Cracked, collapsed, or oil-contaminated vacuum hoses.
Whistling or hissing sounds from the engine bay.
Rough idle or inconsistent engine performance.
Visible damage to the suction-pump housing or fittings.
Evidence of excess crankcase pressure.
These symptoms may also result from other crankcase-ventilation or vacuum-system faults. Inspect all connected hoses, check valves, and fittings before replacing parts.
OE Part Number: 058 133 753 D
Function: Supports engine-vacuum routing and crankcase-ventilation operation.
Check-Valve Design: Helps control vacuum direction through connected circuits.
Direct Replacement: Designed for the corresponding original-equipment mounting and hose configuration.
Engine Protection Support: Helps reduce the risk of pressure-related seal and hose failures.
OE-Style Construction: Suitable for restoring a damaged or restricted original pump.
Always verify fitment by VIN before ordering.
058 133 753 D
058133753D
058-133-753-D
058.133.753.D
| Weight | .35 lbs |
|---|---|
| Dimensions | 6 × 4 × 2.5 in |
| Mfg Part # | 058133753D |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1997-2000, 2002-2005 | Audi | A4 | 1.8L | |
| 2000, 2002-2005 | Audi | A4 | 2.0L | |
| 1997-1999 | Audi | A4 | 2.8L V6 | |
| 2010 | Audi | A5 | 2.0L | |
| 1998-2001, 2006-2008 | Audi | A6 | 2.0L | |
| 2000-2006 | Audi | A8 | 4.2L V8 | |
| 2003-2004 | Audi | RS6 | 4.2L | |
| 2000-2002, 2004-2008 | Audi | S4 | 2.7L V6 | |
| 2008-2011 | Audi | S5 | 4.2L V8 | |
| 2002-2003 | Audi | S6 | 4.2L V8 | |
| 2001-2003 | Audi | S8 | 4.2L V8 | |
| 2000-2002 | Audi | TT | 1.8L | |
| 1999-2005 | Volkswagen | Beetle | 1.8L | |
| 2000-2006 | Volkswagen | Golf | 1.8L | |
| 2000-2001 | Volkswagen | Jetta | 1.8L | |
| 1998-2005 | Volkswagen | Passat | 1.8L | |
| 2000, 2002-2005 | Volkswagen | Passat | 2.8L V6 | |
| 2004-2006 | Volkswagen | Phaeton | 4.2L V8 | |
| Audi | 100 | V6 | Use vehicle selector to confirm fitment | |
| Audi | B5 A4 | 1.8T | Use vehicle selector to confirm fitment | |
| Audi | B5 A4 | V6 12v | Use vehicle selector to confirm fitment | |
| Audi | B5 A4 | V6 30v | Use vehicle selector to confirm fitment | |
| Audi | B5 A4 | 10v | Use vehicle selector to confirm fitment | |
| Audi | B5 S4 | 2.7T | Use vehicle selector to confirm fitment | |
| Audi | B6 A4 | 1.8T | Use vehicle selector to confirm fitment | |
| Audi | B6 A4 | V6 30v | Use vehicle selector to confirm fitment | |
| Audi | B6 A4 | 10v | Use vehicle selector to confirm fitment | |
| Audi | B6 S4 | V8 | Use vehicle selector to confirm fitment | |
| Audi | B7 A4 | 2.0T | Use vehicle selector to confirm fitment | |
| Audi | B7 A4 | V6 3.2L | Use vehicle selector to confirm fitment | |
| Audi | B7 S4 | V8 | Use vehicle selector to confirm fitment | |
| Audi | C4 A6 | 2.8 | Use vehicle selector to confirm fitment | |
| Audi | C5 A6 | 2.7T | Use vehicle selector to confirm fitment | |
| Audi | C5 A6 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | C5 A6 | V6 2.8L | Use vehicle selector to confirm fitment | |
| Audi | C5 A6 | V6 3.0L | Use vehicle selector to confirm fitment | |
| Audi | C5 S6 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | C6 A6 | V6 3.2L | Use vehicle selector to confirm fitment | |
| Audi | C6 A6 | V8 4.2L | Use vehicle selector to confirm fitment | |
| Audi | D2 A8 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | D3 A8 | 4.2 | Use vehicle selector to confirm fitment | |
| Audi | D3 A8 | W12 | Use vehicle selector to confirm fitment | |
| Audi | RS6 | 4.2T | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 180HP | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 225HP | Use vehicle selector to confirm fitment | |
| Volkswagen | 337/20AE | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | 1.8T | For vehicles with AWW or AWD engine codes only | |
| Volkswagen | Golf IV | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | 1.8T | For vehicles with AWW or AWD engine codes only | |
| Volkswagen | Jetta IV | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | VR6 12v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | VR6 24v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV GLI | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B5 | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B5 | V6 30v | Use vehicle selector to confirm fitment |
The 07K 145 172C is a Metrix OE-style lower accessory drive belt idler pulley for select Volkswagen and Audi 2.5L 5-cylinder applications. Engineered to OE dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and smooth, quiet accessory drive operation — no modifications required.
The 021 121 121A cover is a precision-fit thermostat housing lid that replaces brittle factory plastic to ensure a dependable, leak-free cooling system.
Replacement valve cover gasket for 24v VR6 engines. Designed to stop oil leaks and protect your valvetrain in 2.8L and 3.2L applications.
Victor Reinz OEM-quality thermostat housing O-ring, OE number 021 121 119 A. Prevents coolant leaks at the thermostat housing and engine block connection.
OEM-quality thermostat housing O-ring, OE number 021 121 119 A. Seals the thermostat housing, bypass pipe, and cooling sensor connections.
