The 06A 121 132 flange by URO Parts is an OE-style coolant hose flange for select Volkswagen and Audi vehicles. It restores leak-free coolant routing with a direct bolt-on fit and no modifications required.
$9.99
The 06A 121 132 flange by URO Parts is an OE-style replacement coolant hose flange for select Volkswagen and Audi vehicles equipped with the 1.8T four-cylinder engine. Mounted at the cylinder head, this multi-port flange provides correctly aligned connection points for coolant hoses, routing coolant between the engine, radiator circuit, and heater system to maintain stable operating temperature throughout operation. URO Parts manufactures this flange to OE dimensions — offering reliable European replacement parts as an alternative to the OEM dealer component.
Plastic coolant flanges are one of the most common leak points on these platforms due to constant heat cycling and cooling system pressure. Over time, the housing becomes brittle, warps, or cracks — leading to coolant seepage, low coolant warnings, and the risk of overheating. Replacing the worn unit with this 06A 121 132 flange from URO Parts restores leak-free sealing and dependable coolant circulation.
A failing coolant hose flange will show warning signs that should not be ignored. The most common indicators include visible coolant seepage or dripping near the cylinder head area, a persistent coolant odor from the engine bay after operation, and a low coolant warning light with no obvious external source. Physical inspection may reveal a cracked housing or deteriorated sealing surfaces around the flange ports. Left unaddressed, a leaking flange leads to progressive coolant loss, unstable engine temperature, reduced heater performance, and the risk of engine overheating.
OEM Reference: 06A 121 132
Brand: URO Parts — quality OE-style European replacement
High-quality molded construction — resists warping and cracking
Manufactured to OE dimensions for correct fit, port alignment, and hose routing
Includes O-ring for a complete, ready-to-install repair
Replace the included O-ring at installation — do not reuse the original seal. Inspect all connected coolant hoses for swelling, softness, or cracking and replace if needed. Use new hose clamps if the originals show signs of corrosion or weakness. Torque all fasteners to factory specification to avoid distorting the sealing surface. After installation, refill with the VW/Audi-approved coolant mixture and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
06A 121 132A
06A 121 132B
06A 121 132C
06A 121 132Q
BECK ARNLEY: 147-0013
Dorman: 902-707
Gates: CO34750
VAICO: V10-0560
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 7.0 × 6.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1999, 2005 | Volkswagen | Jetta IV | 2.0T | |
| 1999, 2005 | Volkswagen | Golf IV | 2.0T |
The 06K 903 133AF is an OE-spec accessory drive belt tensioner assembly for select Volkswagen and Audi 2.0T applications. Engineered to factory specifications, this direct-fit replacement restores correct belt tension across all accessory drive components — no modifications required.
The ABS Speed Sensor WHT 003 858B by German Service Tech is an OE-style replacement for select Volkswagen and Audi models. Built for plug-and-play installation with no modifications required.
The Saleri Italo Water Pump 07K121011B is an OE-quality replacement for select Volkswagen engines. It restores reliable coolant circulation, keeps your engine at the correct operating temperature, and installs directly with no modifications required.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
The Graf 06H 121 026ED Water Pump and thermostat assembly is an OE-spec integrated cooling module featuring a robust aluminum housing engineered for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. The aluminum construction eliminates the warping and cracking common to original plastic designs, restoring factory-spec coolant circulation and precise temperature regulation. Includes all required O-rings and seals for a complete installation.
