Bremi 06A905097A Ignition Coil provides dependable spark delivery for compatible ignition systems and engine applications.
$96.99
The 06A905097A Ignition Coil by Bremi generates the high-voltage energy required to produce a spark at the spark plug. It plays a key role in initiating combustion inside the engine cylinder. Consequently, a properly functioning coil supports smooth starting, stable idling, and consistent engine performance.
Bremi is a recognized OE supplier of ignition components. Therefore, this replacement coil is engineered to withstand engine-bay heat, vibration, and continuous electrical demand.
Ignition coils operate under constant electrical stress and repeated heat cycles. Over time, internal windings or insulation can weaken. As a result, spark output may become inconsistent.
A weak or failing coil can cause misfires, rough idling, or hesitation during acceleration. Furthermore, prolonged misfiring may allow unburned fuel to enter the exhaust system, which can affect emissions components. Therefore, replacing the 06A905097A Ignition Coil promptly helps restore dependable ignition performance and protect related engine systems.
Inspect the ignition system if you notice any of these symptoms:
Check engine light with a misfire-related code.
Rough or unstable idle.
Hesitation during acceleration.
Reduced engine power.
Difficult starting or intermittent starting.
Increased fuel consumption.
Engine vibration caused by incomplete combustion.
Visible cracks or damage on the coil housing.
Corrosion or looseness at the electrical connector.
OE Part Number: 06A 905 097 A
Manufacturer: Bremi
Function: Generates high-voltage energy for spark plug ignition.
Application: Designed for compatible ignition-system configurations.
Performance: Supports consistent spark delivery and efficient combustion.
Fitment: Direct-fit replacement for applicable vehicles.
Construction: Built to withstand engine-bay heat and vibration.
Always verify fitment by VIN before ordering. Before replacing the 06A905097A Ignition Coil, inspect the spark plug, wiring, and electrical connector, as worn components can create similar symptoms.
Always verify fitment by VIN before ordering. Compatibility depends on engine code, model year, ignition-system design, and the original installed part number.
06A 905 097 A
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000-2010 | Volkswagen | Beetle | 2.0L | |
| 2001-2006 | Volkswagen | Golf | 2.0L | |
| 2001-2005 | Volkswagen | Jetta | 2.0L |
The Meyle 8E0 121 403 Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi A4 B6 and B7 platform models. Furthermore, it manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — with an integrated level sensor included for a complete, plug-and-play installation.
The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
