The 06D 121 132C coolant hose flange is an OE-quality direct-fit replacement for the Audi A4 B7 2.0T. Engineered for precise fitment at the rear of the engine, it houses the coolant temperature sensor and restores a leak-free seal.
$20.00
The 06D 121 132C coolant hose flange (OE) is a genuine-spec replacement component used on the Audi A4 B7 2.0T. Located at the rear of the engine, this flange serves as a critical connection point in the cooling circuit, providing secure hose interfaces and housing the engine coolant temperature sensor to ensure proper coolant routing and temperature monitoring for stable engine operation.
Because it operates under constant heat cycling and cooling system pressure, the original plastic flange can become brittle over time. Cracks, warped sealing surfaces, or leaks at the hose connections lead to coolant seepage, low-coolant warnings, and potential overheating. Replacing the worn unit with an OE-quality 06D 121 132C restores proper sealing and dependable cooling system performance.
A failing coolant hose flange on the Audi A4 B7 2.0T typically presents as coolant seepage or dried residue at the rear of the engine near the flange body. A persistent coolant smell after driving, unexplained drops in reservoir level, or an illuminated low-coolant warning are further warning signs. Physical inspection may reveal a visibly cracked or brittle plastic housing, particularly at the hose ports or around the temperature sensor bore. A fully failed flange can result in sudden, rapid coolant loss and engine overheating. Early replacement prevents more extensive and costly repairs.
OEM Reference: 06D 121 132C; supersedes 06D 121 132, 06D 121 132A, 06D 121 133A
OE-quality fit and sealing performance
Rear-engine-mounted design housing the coolant temperature sensor
Molded multi-port construction for proper coolant distribution and hose alignment
Heat- and coolant-resistant composite construction
Designed to provide secure, leak-free hose connections under system pressure
Replace any associated O-rings, seals, and hose clamps during installation for best results. Refill with the correct VW/Audi-approved coolant and properly bleed the cooling system after service. Inspect nearby hoses and plastic fittings; replacing aging components together helps prevent repeat leaks.
Always verify fitment by VIN before ordering.
06D 121 132C
06D 121 132
06D 121 132A
06D 121 133A
| Weight | 0.35 lbs |
|---|---|
| Dimensions | 6.0 × 5.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2005, 2009 | Audi | A4 | 2.0T |
The 06A 903 315 (Gates 38018) is an OE-quality accessory drive belt idler pulley for select Volkswagen and Audi applications. Engineered to OE dimensions with a premium sealed bearing, this direct-fit pulley restores correct belt alignment and quiet, smooth accessory drive operation no modifications required.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The Graf 06A 121 012G is an OE-quality timing-belt-driven water pump for select Volkswagen and Audi 1.8T and 2.0 engines. Built for direct installation with no modifications required.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
The Graf 06H 121 026ED Water Pump and thermostat assembly is an OE-spec integrated cooling module featuring a robust aluminum housing engineered for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. The aluminum construction eliminates the warping and cracking common to original plastic designs, restoring factory-spec coolant circulation and precise temperature regulation. Includes all required O-rings and seals for a complete installation.
