Water Pump & Thermostat – 06H 121 026BF (Borsehung)

Description

The 06H 121 026BF is an integrated water pump and thermostat assembly manufactured by Borsehung for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. Combining the mechanical coolant pump and electronically controlled thermostat into a single housing, this module manages both coolant circulation and temperature regulation simultaneously — enabling rapid engine warm-up, stable operating temperature, and consistent protection against overheating.

Borsehung is a European aftermarket brand specializing in OE-specification cooling and drivetrain components for Volkswagen Group vehicles. The 06H 121 026BF is engineered to match the original factory assembly in housing geometry, impeller design, and thermostat calibration, ensuring direct bolt-on fitment and factory-level performance from installation. The kit includes all required O-rings and seals for a complete single-service replacement using the original hose connections and sensor ports.

Signs Your Water Pump Needs Replacing

Integrated water pump and thermostat assemblies on EA888 engines are a known failure point as mileage accumulates. Common warning signs include coolant leaks at the housing seam or O-ring surface, cracked or warped plastic housing, rising coolant temperature gauge readings, low coolant warnings, and stored fault codes related to thermostat performance or engine temperature regulation. In some cases, internal impeller wear can cause inadequate coolant flow without any visible external leak, leading to gradual overheating under load. When these symptoms appear, replacing the complete assembly immediately is the safest course of action to protect the turbocharged engine.

Key Features

• OEM Reference: 06H 121 026BF

• Brand: Borsehung — OE-specification European cooling system supplier

• Integrated water pump and electronically controlled thermostat in one assembly

• OE-matched impeller design for factory-spec coolant flow

• Factory-calibrated thermostat for precise temperature regulation

• Includes all required O-rings and seals

• Retains original hose connections and sensor ports

• Direct bolt-on replacement — no modifications required

• Addresses common EA888 housing leaks and thermostat performance faults

Service Notes

Refill with VW/Audi-approved G13 coolant and bleed the cooling system thoroughly after installation. Inspect the accessory belt and tensioner during the same service interval. Given the labor involved in accessing this assembly, it is also recommended to inspect nearby plastic coolant fittings and hose connections for signs of heat fatigue and replace as needed.

Compatibility & Applications

Always verify fitment by VIN before ordering. Engine variant and production date may affect compatibility within the same model year; confirm applicability for your specific vehicle before purchase.

Cross Reference Numbers

Additional information