The Genuine 06K 117 021K Oil Cooler is a factory OEM replacement engineered to exact VW/Audi specifications. It regulates engine oil temperature, prevents thermal breakdown, and protects critical internal components — offering the highest level of fitment confidence available.
$135.00
The 06K 117 021K Oil Cooler is a Genuine factory OEM replacement designed to restore precise engine oil temperature regulation on select Volkswagen and Audi TSI/TFSI applications. Specifically, this oil cooler transfers excess heat from the engine oil into the coolant circuit, preventing viscosity breakdown under sustained high-load and high-temperature conditions. Furthermore, the Genuine 06K 117 021K Oil Cooler is manufactured to exact factory dimensions, ensuring direct fitment with all coolant connections, gasket surfaces, and mounting hardware — no modifications required.
Oil cooler failures typically develop gradually, so identifying warning signs early helps prevent extensive secondary engine damage. First, milky or foamy oil visible on the dipstick or inside the oil filler cap is a strong indicator that coolant is entering the oil circuit through a compromised cooler. Additionally, unexplained coolant loss with no visible external leak often points to internal seepage within the cooler itself. Furthermore, an engine running hotter than normal under load — despite an otherwise healthy cooling system — may indicate restricted or degraded oil cooler performance. In advanced cases, contaminated oil accelerates wear across bearings and other precision internal components rapidly.
OEM Reference: 06K 117 021K
Brand: Genuine — factory OEM part to exact VW/Audi specifications
Manufactured to precise OEM dimensions for guaranteed direct fitment
Correct port geometry for seamless coolant circuit integration
Factory-grade materials engineered for sustained heat cycling and pressure resistance
OEM-spec sealing surfaces for a leak-free, long-lasting installation
No modifications required — direct bolt-on replacement
Always replace the oil cooler gasket and sealing O-rings at the time of installation — reusing old seals remains the most common cause of post-repair leaks. After installation, refill both engine oil and coolant to the correct levels using manufacturer-approved fluids. Next, run the engine to full operating temperature and inspect all connections carefully for any signs of seepage. Furthermore, monitor both fluid levels over the first several driving cycles to confirm the installation is fully sealed. Finally, if coolant contamination was present before the repair, flush the engine oil system thoroughly before refilling with fresh oil.
Always verify fitment by VIN before ordering.
Cross Reference Numbers
06K 117 021
06K 117 021A
06K 117 021B
06K 117 021C
06K 117 021J
| Weight | 1.4 lbs |
|---|---|
| Dimensions | 6 × 5 × 4 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2018-2025 | Audi | Q5 | ||
| 2021-2022 | Audi | Q5 PHEV | ||
| 2018-2026 | Volkswagen | Atlas | ||
| 2013-2019 | Volkswagen | Beetle | ||
| 2015-2021 | Volkswagen | GTI | ||
| 2015-2018 | Volkswagen | Golf | ||
| 2015-2019 | Volkswagen | Golf SportWagen | ||
| 2013-2025 | Volkswagen | Jetta | ||
| 2014-2021 | Volkswagen | Passat | ||
| 2018-2025 | Volkswagen | Tiguan |
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The 5N0 122 291C is an OE-style lower radiator coolant hose adapter by VIKA, engineered for the VW Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. Positioned at the front lower radiator hose junction, this coupling piece connects the lower coolant hose to the radiator outlet port, completing the primary cooling circuit return path. It serves as a cost-effective alternative to the Genuine VW lower adapter. Always confirm fitment by VIN before ordering.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Saleri Italo Water Pump 07K121011B is an OE-quality replacement for select Volkswagen engines. It restores reliable coolant circulation, keeps your engine at the correct operating temperature, and installs directly with no modifications required.
