The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
$10.00
The 5N0 122 291 Coolant Hose Adapter by Burgaflex is an OE-style upper radiator coupling piece. Specifically, it is designed for the Volkswagen Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. This fitting connects the upper coolant hose to the radiator inlet port, maintaining a sealed, leak-free junction in the primary cooling circuit. Furthermore, it ships complete with its C-clip retention spring and sealing ring, so the entire coupling assembly replaces in a single step. Because the 5N-chassis Tiguan runs a unique PQ46-based cooling layout, this adapter fits only the Mk1 Tiguan (2009–2018). As a result, it does not interchange with Mk2 MQB-platform variants.
Over time, the plastic body of the 5N0 122 291 coolant hose adapter weakens from repeated heat cycling and sustained system pressure. In particular, the quick-release coupling port at the radiator inlet experiences the most frequent thermal expansion and contraction cycles. Consequently, hairline cracks can form at this location. Additionally, the C-clip and sealing ring can harden and lose their retention force. Even a minor failure at this junction allows coolant to bypass the coupling. As a result, gradual coolant loss, recurring low-coolant warnings, and progressive engine overheating can follow. Therefore, replacing the failing coupling promptly with a new 5N0 122 291 restores a factory-correct sealed junction.
Catching a failing 5N0 122 291 early prevents escalating cooling system damage. Therefore, watch for these warning signs:
Coolant seeping or leaving dried residue around the upper radiator hose coupling or at the radiator inlet port
Recurring low coolant warnings despite topping off the reservoir, with no other obvious leak source
A sweet coolant odor from the engine bay after reaching normal operating temperature
Visible cracking or brittleness on the plastic coupling body or at the C-clip retention groove
The upper radiator hose feeling loose or failing to click and lock securely into place
If any of these symptoms appear, replace the 5N0 122 291 promptly. Additionally, pressure-test the cooling system before returning the vehicle to service.
OEM Reference: 5N0 122 291 (Burgaflex OE-style aftermarket)
Upper radiator coolant hose adapter — front position
Supplied complete with C-clip retention spring and sealing ring
Engineered to match OE connector geometry for the VW Tiguan Mk1 (5N-chassis)
Compatible with the 2.0L EA113/EA888 engine (1984cc)
Cost-effective OE-style alternative to the Genuine VW dealer component
Direct-fit replacement — no modifications required
Always verify fitment by VIN before ordering. Multiple variants may exist within the same model year.
5N0 122 291 (VAG OEM reference — Burgaflex OE-style replacement)
CHC0729 (Rein Automotive cross-reference)
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 6.0 × 4.0 × 3.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2009, 2017 | Volkswagen | Tiguan | 2.0T |
The 022 145 276F is an INA (Schaeffler) OE-quality accessory belt tensioner pulley for select Volkswagen and Audi 3.2L and 3.6L VR6 applications. Built to factory profile with a precision sealed bearing, this direct-fit pulley restores correct belt tracking and quiet operation across the accessory drive — no modifications required.
The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.
The 5Q0 122 291AC is the OE right-side coolant bypass line adapter (T-piece) used on select 2018–2023 Volkswagen and Audi MQB-platform vehicles equipped with a 2.0L engine and manual transmission. Positioned on the passenger side of the cooling circuit, it serves as the outlet adapter for the cooling system bypass line — a distinct application from the central water pump connectors used on the same platform. Always confirm fitment by VIN before ordering, as this part is transmission-specific.
The Service Tech ABS Speed Sensor WHT003858B is a cost-effective, OE-style replacement for select Audi and Volkswagen models. As an updated revision of the WHT003858, it delivers precise wheel-speed data to ABS, ESP, and traction control systems — with plug-and-play installation and no modifications required.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
