PTFE design to stop oil leaks and prevent internal engine damage
$4.60
If you notice a puddle of engine oil starting to form under your vehicle, be sure to check your camshaft and crankshaft seals for breaks. This seal ensures that the camshaft or crankshaft will not leak engine oil during engine operation, keeping your engine lubricated properly.This is the updated PTFE seal lip design, with no spring located behind inner sealing lip. Proper installation instructions must be observed to ensure proper seal & to prevent premature failure.Installation tips:Surfaces MUST be clean & completely dryDO NOT use any oil or grease on sealing surfaceTo ensure proper seal, motor should not be operated for at least 4 hours after installation. This allows the PTFE sealing lip to be evenly positioned around the camshaft.
81-34367-00
4026634448366
023913740092
| Mfg Part # | 038103085C |
|---|---|
| Supplier | C |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| Audi | A3 8P | 2.0T | For vehicles with FSI engines only | |
| Audi | B5 A4 | 1.8T | Use vehicle selector to confirm fitment | |
| Audi | B6 A4 | 1.8T | Use vehicle selector to confirm fitment | |
| Audi | B7 A4 | 2.0T | Use vehicle selector to confirm fitment | |
| Audi | C5 A6 | 2.7T | Use vehicle selector to confirm fitment | |
| Audi | C5 Allroad | 2.7T | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 180HP | Use vehicle selector to confirm fitment | |
| Audi | TT MKI | 225HP | Use vehicle selector to confirm fitment | |
| Audi | TTS | 2.0T | Use vehicle selector to confirm fitment | |
| Volkswagen | 337/20AE | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | EOS | 2.0T | For vehicles with FSI engines only | |
| Volkswagen | Golf IV | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf V | 2.0T | For vehicles with FSI engines only | |
| Volkswagen | Jetta IV | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | 2.0 | Not for BBW engine code | |
| Volkswagen | Jetta IV | TDI | For vehicles with VIN from 9M-1-075 841 only, split is in the 2001 model year | |
| Volkswagen | Jetta IV GLI | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta V | 2.0T | For vehicles with FSI engines only | |
| Volkswagen | Jetta V | TDI | For vehicles with BRM engine code only | |
| Volkswagen | New Beetle | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | New Beetle | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B5 | 1.8T | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B5 | V6 30v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B6 | 2.0T | Use vehicle selector to confirm fitment |
The 11 28 8 673 720 is an INA (Schaeffler) OEM-quality accessory belt deflection/idler pulley for BMW N55 TwinPower Turbo and S55 Twin Turbo engines across the F-series lineup — including the 3 Series, 4 Series, 5 Series, X3, X5, M3, and M4. This pulley guides the serpentine belt around the accessory drive and delivers quiet, stable belt tracking through a precision sealed bearing — with no modifications required.
The 021 103 601B pan is a stamped-steel, OE-style replacement oil sump for select Volkswagen VR6 engines. It restores proper oil containment and lower-engine protection.
The 021 115 562A filter by Hengst is an OE-quality oil filter kit that prevents contaminants from damaging your engine, featuring a precision-fit cartridge and seal.
Replacement valve cover gasket for 24v VR6 engines. Designed to stop oil leaks and protect your valvetrain in 2.8L and 3.2L applications.
