Direct-fit valve cover gasket for compatible Volkswagen engines. Replaces hardened or damaged seals to help contain engine oil.
$14.98
The 051 103 483A valve cover gasket seals the joint between the valve cover and cylinder head on compatible Volkswagen engines. It helps keep engine oil within the upper valvetrain area, where it lubricates moving components during operation.
Constant exposure to engine heat and oil can cause the original gasket material to harden, shrink, or crack. Replacing the gasket helps restore a secure valve-cover seal and supports proper engine lubrication.
A worn valve cover gasket can allow oil to seep down the side of the engine. Small leaks may worsen over time and lower the oil level between routine services.
The 051 103 483A valve cover gasket provides a direct replacement solution for restoring the seal at the valve-cover mounting surface. Correct installation helps protect nearby components from oil contamination and reduces the chance of hot oil odors.
Inspect the gasket area if you notice any of these conditions:
Fresh oil around the outer edge of the valve cover.
Oil residue running down the engine block.
A hot oil odor after the engine reaches operating temperature.
Oil spots below the vehicle after parking.
Low engine-oil level between scheduled oil changes.
A hardened, flattened, or visibly cracked gasket during inspection.
OE Part Number: 051 103 483A
Cross Reference: Elring 915.653
Function: Seals the valve cover to the cylinder head.
Fitment Type: Direct replacement for compatible Volkswagen applications.
Material Purpose: Resists exposure to engine oil and normal operating temperatures.
Service Benefit: Replaces a worn gasket that may allow external oil seepage.
Always verify fitment by VIN before ordering. Complete the service with the engine cool. Remove all old gasket material and oil residue from the valve cover and cylinder-head sealing surfaces before installation.
Position the gasket evenly in the valve-cover channel. Tighten the fasteners in the manufacturer-specified sequence and torque specification. Excessive torque can distort the valve cover or damage the new gasket.
051 103 483A
| Weight | .20 lbs |
|---|---|
| Dimensions | 12 × 6 × .5 in |
| Mfg Part # | 051103483A |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1998-2001 | Volkswagen | Beetle | 2.0L | |
| 1995-2002 | Volkswagen | Cabrio | 2.0L | |
| 1993-2000 | Volkswagen | Golf | 2.0L | |
| 1994-1998 | Volkswagen | Golf | 1.8L | |
| 1994-2000 | Volkswagen | Jetta | 1.8T | |
| 1994-2000 | Volkswagen | Jetta | 2.0L | |
| 1995-1996 | Volkswagen | Passat | 1.8L | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf IV | 2.0 | For vehicles with AEG engine code only | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta IV | 2.0 | For vehicles with AEG engine code only | |
| Volkswagen | New Beetle | 2.0 | For vehicles with AEG engine code only | |
| Volkswagen | Passat B4 | 2.0 | For vehicles with AEG engine code only |
The 03L 145 276 is an OE-quality accessory belt idler pulley for select Volkswagen and Audi 2.0 TDI applications. Built to factory dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and quiet accessory drive operation — no modifications required.
The 06H 121 119E thermostat housing o-ring is a factory Genuine OEM seal designed to provide a pressure-tight connection between the thermostat housing and the engine.
The 021 121 121A cover is a precision-fit thermostat housing lid that replaces brittle factory plastic to ensure a dependable, leak-free cooling system.
The 021 115 562A filter by Hengst is an OE-quality oil filter kit that prevents contaminants from damaging your engine, featuring a precision-fit cartridge and seal.
032121142 Sensor Clip is an OEM-style coolant temperature sensor retainer that supports correct sensor seating and leak-free sealing.
