The 07K 145 172C is a Metrix OE-style lower accessory drive belt idler pulley for select Volkswagen and Audi 2.5L 5-cylinder applications. Engineered to OE dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and smooth, quiet accessory drive operation — no modifications required.
$15.00
The 07K 145 172C Accessory Belt Idler Pulley by Metrix is an OE-style replacement for select Volkswagen and Audi vehicles equipped with the 2.5L 5-cylinder engine. This lower idler pulley serves as a fixed guide point in the accessory drive system, maintaining proper belt routing, alignment, and consistent load distribution across all belt-driven accessories — including the alternator and A/C compressor.
Because the idler pulley spins continuously at engine speed, its sealed bearing is subject to constant heat, load, and contamination over time. As the bearing wears, it produces chirping or grinding noise, allows pulley wobble, and causes belt flutter and uneven belt wear. Left unaddressed, a failing idler pulley accelerates belt deterioration and can lead to unexpected belt loss. Replacing the worn unit with this 07K 145 172C restores quiet, consistent belt tracking and long-term accessory drive reliability.
Metrix supplies OE-style replacement components engineered to match factory dimensions, clearances, and performance specifications. The 07K 145 172C is built to OE pulley profile and bearing specifications, ensuring full belt contact and correct tracking alignment throughout the accessory drive circuit. Its sealed bearing delivers smooth, quiet rotation under continuous engine load — a true direct-fit replacement requiring no modifications to the engine bay.
Catching idler pulley failure early prevents accessory belt loss and downstream damage. Look for the following symptoms:
Chirping, squealing, or grinding noise from the front of the engine that changes with RPM
Visible pulley wobble or lateral movement when inspected at idle
Belt flutter, vibration, or inconsistent tracking across pulleys
Accelerated or uneven wear on the accessory drive belt
Roughness or resistance when spinning the pulley by hand with the engine off
If any of these indicators are present, the idler pulley should be replaced promptly.
OEM Reference: 07K 145 172C
Brand: Metrix — OE-style aftermarket replacement supplier
Sealed bearing for smooth, quiet rotation under continuous load
OE-spec pulley profile for correct belt alignment and tracking
Heat- and vibration-resistant construction for long service life
Direct-fit lower idler pulley — no modifications required
Helps prevent belt squeal, flutter, and premature belt wear
Always inspect and replace the accessory drive belt if it shows cracking, glazing, or fraying — replacing both together ensures a complete service
Check the belt tensioner and all remaining pulleys for bearing noise, play, or rough rotation; replace any worn components at the same time
Verify correct belt routing before startup to ensure the belt is fully seated in all pulley grooves
Always verify fitment by VIN before ordering. Multiple variants may exist within the same model year.
07K 145 172C (OEM VAG)
Gates 36105
Continental Elite 49166
Dorman 419-702
URO Parts 07K145172C
| Weight | 0.80 lbs |
|---|---|
| Dimensions | 5.0 × 5.0 × 2.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2011, 2013 | Audi | TT RS | 2.5T | |
| 2006, 2014 | Volkswagen | Beetle | 2.5L | |
| 2010, 2014 | Volkswagen | Golf VI | 2.5T | |
| 2005, 2008 | Volkswagen | Jetta V | 2.5L | |
| 2008, 2014 | Volkswagen | Jetta VI | 2.5L | |
| 2012, 2014 | Volkswagen | Passat | 2.5L | |
| 2006, 2009 | Volkswagen | Rabbit | 2.5L |
The 06K 903 133AF is an OE-spec accessory drive belt tensioner assembly for select Volkswagen and Audi 2.0T applications. Engineered to factory specifications, this direct-fit replacement restores correct belt tension across all accessory drive components — no modifications required.
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.
