The 1K0 121 087E coolant hose flange is an OE‑spec connector used to route coolant between engine components — molded for a precise fit and long‑term reliability.
$12.00
The 1K0 121 087E flange is a genuine‑spec coolant hose connector used on various Volkswagen and Audi models, particularly those built on the MK5/MK6 and 8P platforms. This molded component routes engine coolant between critical parts—such as the radiator, expansion tank, or engine block—to ensure proper pressure and flow for stable engine operating temperatures.
As vehicles age, original coolant hoses are exposed to continuous heat cycling, vibration, and system pressure. Consequently, rubber elements may soften, swell, or crack internally, while plastic fittings often become brittle and prone to snapping. These conditions can cause coolant leaks, low‑coolant warnings, and even engine overheating. Thus, replacing the worn line with this OE‑quality 1K0 121 087E restores factory‑level sealing performance and reliable coolant circulation.
Early detection of cooling system wear helps avoid costly repairs. Look out for these indicators:
Coolant residue or active dripping near hose connections.
Frequent need to refill the coolant reservoir without visible external leaks.
Swelling, cracking, or softness along the length of the hose.
Brittle or broken plastic connection points at the flange ends.
If any of these appear, inspect and replace the flange promptly to safeguard engine performance.
This OE replacement part delivers the same performance and durability as the original:
OEM Reference: 1K0 121 087E
OE‑quality molded construction for precise routing and clearance
Engineered to withstand high cooling system pressures and extreme heat
Designed to match factory bends and connection points for a direct‑fit installation
Helps prevent coolant loss and protects the engine from overheating
Durable materials ensure a long service life compared to standard aftermarket hoses
During installation of the 1K0 121 087E flange, follow these best practices:
Replace any associated hose clamps and O‑rings to ensure a lasting, leak‑free seal.
Refill the system with the correct VW/Audi‑approved coolant (G12++/G13) and properly bleed the cooling system afterward.
Inspect nearby plastic coolant flanges and connectors; replacing aging components together reduces the risk of future leaks.
Always verify fitment by VIN before ordering.
| Make | Model | Generation | Year Range | Engine |
|---|---|---|---|---|
| Volkswagen | Golf | Mk5 | 2004–2009 | 2.0L / 2.0L TSI |
| Volkswagen | Jetta | Mk5 / Mk6 | 2005–2016 | 2.0L / 2.5L |
| Volkswagen | Rabbit | Mk5 | 2006–2009 | 2.5L |
| Volkswagen | Golf / SportWagen | Mk6 | 2010–2014 | 2.5L |
| Audi | A3 / TT | 8P / 8J | 2004–2014 | 2.0L TFSI / 2.5L |
1K0 121 087E
1K0‑121‑087‑E
1K0.121.087.E
1K0121087E
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 5.0 × 4.0 × 3.0 in |
The 022 145 276F is an INA (Schaeffler) OE-quality accessory belt tensioner pulley for select Volkswagen and Audi 3.2L and 3.6L VR6 applications. Built to factory profile with a precision sealed bearing, this direct-fit pulley restores correct belt tracking and quiet operation across the accessory drive — no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The Graf 06A 121 012G is an OE-quality timing-belt-driven water pump for select Volkswagen and Audi 1.8T and 2.0 engines. Built for direct installation with no modifications required.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
The Graf 06H 121 026ED Water Pump and thermostat assembly is an OE-spec integrated cooling module featuring a robust aluminum housing engineered for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. The aluminum construction eliminates the warping and cracking common to original plastic designs, restoring factory-spec coolant circulation and precise temperature regulation. Includes all required O-rings and seals for a complete installation.
