Direct-fit engine oil pan for compatible Volkswagen applications. Replaces cracked, dented, or corroded pans to restore proper oil containment.
$23.99
The 051 103 601 oil pan forms the lower reservoir of the engine lubrication system. It stores engine oil after circulation and provides a mounting surface for the drain plug. A properly fitted oil pan helps maintain the oil supply needed to lubricate internal engine components.
Road debris, potholes, and contact with raised surfaces can dent or crack the original pan. Vehicles with reduced ground clearance face a greater risk of under-engine impact damage.
A damaged pan can allow engine oil to escape and reduce the oil level below the amount required for safe lubrication. Continued operation with low oil can increase friction and contribute to internal engine damage.
The 051 103 601 oil pan replaces a damaged or corroded original unit. It restores the engine’s lower oil reservoir and helps support correct oil containment during normal operation.
Inspect the lower engine area if you notice:
Fresh engine oil on the ground below the vehicle.
Visible dents, cracks, rust, or impact damage on the pan.
Oil residue around the drain-plug area or pan edge.
A low engine-oil warning or repeated low oil level.
An oil pan that has contacted road debris or a raised surface.
OE Part Number: 051 103 601
Previous Revision: 048 103 601
Function: Stores engine oil after it returns from the lubrication system.
Fitment Type: Direct replacement for compatible water-cooled Volkswagen applications.
Application Note: Suitable for select four-cylinder 8-valve, 16-valve, and diesel engines.
Important: Confirm the correct drain plug, gasket, and oil-pan sealant requirements before installation.
Always verify fitment by VIN before ordering. Drain the engine oil completely and clean the mating surface before removing the damaged pan. Inspect the oil-pump pickup area for debris or impact damage.
Use the manufacturer-specified gasket or sealant for installation. Tighten all pan fasteners evenly to the correct torque specification. Refill the engine with the correct oil and verify the oil level after running the engine briefly.
051 103 601
| Weight | 5.5 lbs |
|---|---|
| Dimensions | 18 × 12 × 6 in |
| Mfg Part # | 051103601 |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1990-1994 | Volkswagen | Golf | 1.8L | |
| 1990-1994 | Volkswagen | Golf | 2.0L | |
| 1995-1999 | Volkswagen | Cabrio | 2.0L | |
| 1990-1993 | Volkswagen | Jetta | 1.8L | |
| 1990-1993 | Volkswagen | Jetta | 2.0L | |
| 1993-1997 | Volkswagen | Passat | 1.8L | |
| 1993-1997 | Volkswagen | Passat | 1.9L TDI | |
| 1993-1997 | Volkswagen | Passat | 2.0L | |
| Volkswagen | Cabrio III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Corrado | G60 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf I | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf I | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf II | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Golf III | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta I | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta I | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | 8v | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta II | Diesel | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Jetta III | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B3 | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | 2.0 | Use vehicle selector to confirm fitment | |
| Volkswagen | Passat B4 | TDI | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 16v | Use vehicle selector to confirm fitment | |
| Volkswagen | Scirocco II | 8v | Use vehicle selector to confirm fitment |
The 03L 145 276 is an OE-quality accessory belt idler pulley for select Volkswagen and Audi 2.0 TDI applications. Built to factory dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and quiet accessory drive operation — no modifications required.
The 11 28 8 673 720 is an INA (Schaeffler) OEM-quality accessory belt deflection/idler pulley for BMW N55 TwinPower Turbo and S55 Twin Turbo engines across the F-series lineup — including the 3 Series, 4 Series, 5 Series, X3, X5, M3, and M4. This pulley guides the serpentine belt around the accessory drive and delivers quiet, stable belt tracking through a precision sealed bearing — with no modifications required.
The 06J 903 133D is a Mubea OEM-quality accessory drive belt tensioner for Volkswagen and Audi models powered by the 2.0L TSI EA888 engine (CBFA/CCTA) — including the GTI, Jetta GLI, Passat, CC, Eos, Tiguan, Beetle Turbo, Audi A3, TT, and Q3. This tensioner maintains correct serpentine belt tension through a precision spring mechanism and sealed pulley bearing, restoring quiet, reliable accessory drive performance with no modifications required.
The 06H 121 119E thermostat housing o-ring is a factory Genuine OEM seal designed to provide a pressure-tight connection between the thermostat housing and the engine.
OEM-quality 03N115562B Oil Filter for select Volkswagen and Audi engines. Traps harmful contaminants and protects engine components at every oil service interval.
