The Genuine 06K 121 111P is an OEM thermostat housing and coolant outlet engineered for select Volkswagen and Audi EA888 1.8T and 2.0T engines. This direct-fit replacement restores sealed, leak-free coolant routing using factory hose connections and mounting points. Includes sealing O-ring for a complete installation.
$221.99
The 06K 121 111P housing is a factory Genuine OEM thermostat housing and coolant outlet designed for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This molded component connects the thermostat area to the upper radiator and heater circuit hoses, providing a sealed and pressure-rated path for coolant flow out of the engine block. Because it is a factory Genuine part, it matches the original component in every dimension and material specification — ensuring a precise, reliable fit from the moment of installation.
Genuine Volkswagen Group cooling components are produced to the same OEM standards as the parts fitted at the factory. As a result, the 06K 121 111P housing is constructed from high-quality, heat- and pressure-resistant composite material with precision-molded mounting flanges and hose connections. Furthermore, this unit includes the required sealing O-ring, making it a complete, single-service replacement that eliminates the need to source additional hardware separately.
Plastic thermostat housings on EA888 engines are under constant thermal and pressure stress, making them a common failure point as mileage increases. Therefore, early detection is critical. Look for the following warning signs:
Coolant smell from the engine bay during or after operation.
Pink or orange residue around the housing flange or hose connections.
Unexplained gradual coolant loss without a visible external leak.
Rising coolant temperature readings or erratic gauge behavior.
In advanced cases, a cracked or warped housing can cause sudden coolant loss and rapid overheating.
If any of these symptoms appear, replacing the housing promptly is essential to prevent further cooling system and engine damage.
OEM Reference: 06K 121 111P (also: 06K121111P)
Brand: Genuine Volkswagen — factory OEM component
Application: Thermostat housing and coolant outlet for EA888 1.8T and 2.0T TSI/TFSI engines
Material: Heat- and pressure-resistant composite construction for long-term durability
Precision Fit: Molded flanges and hose ports retain all original connections and sensor ports
Complete Kit: Includes sealing O-ring for a full single-service replacement
Direct Bolt-On: No modifications required for installation
During replacement of the 06K 121 111P housing, inspect and replace any hardened, cracked, or swollen hoses and clamps connected to the unit. Furthermore, this housing is commonly replaced together with the water pump and thermostat assembly; combining these repairs maximizes labor efficiency and long-term cooling system reliability. Always refill with VW/Audi-approved G12++ or G13 coolant and perform a complete system bleed after installation to remove trapped air.
Compatibility & Applications
Always verify fitment by VIN before ordering. Engine variant and production date may affect compatibility within the same model year; confirm applicability for your specific vehicle before purchase.
Cross Reference Numbers
06K 121 111P
06K 121 111N
06K 121 111M
06K121111P
| Weight | 4.8 lbs |
|---|---|
| Dimensions | 10.5 × 8.5 × 7.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2013-2017 | Volkswagen | Beetle | 2.0L | |
| 2016-2018 | Volkswagen | Jetta | 1.8L | |
| 2013-2016 | Volkswagen | Jetta | 2.0L | |
| 2014-2017 | Volkswagen | Passat | 1.8L |
The 06A 903 315 (Gates 38018) is an OE-quality accessory drive belt idler pulley for select Volkswagen and Audi applications. Engineered to OE dimensions with a premium sealed bearing, this direct-fit pulley restores correct belt alignment and quiet, smooth accessory drive operation no modifications required.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The Saleri Italo Water Pump 07K121011B is an OE-quality replacement for select Volkswagen engines. It restores reliable coolant circulation, keeps your engine at the correct operating temperature, and installs directly with no modifications required.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
