The 06K 121 132E is an OE-spec coolant flange for select Volkswagen and Audi applications. Precision-molded to factory specifications with heat- and pressure-resistant construction, this direct-fit replacement restores correct coolant routing and leak-free performance.
$12.99
The 06K 121 132E Coolant Flange is an OE-style replacement for select Volkswagen and Audi EA888 1.8T and 2.0T applications. This molded coolant line routes coolant between critical cooling system components — including the water pump, thermostat housing, engine outlet, and heater/radiator circuit — helping maintain stable engine operating temperature and correct system pressure.
Over time, coolant flanges and composite coolant pipes become brittle, swell, or develop cracks due to repeated heat cycling and constant pressure. Sealing points can begin to seep, leading to gradual coolant loss, low-coolant warnings, or engine overheating if left unaddressed. Replacing the worn unit with this direct-fit 06K 121 132E restores correct coolant routing and leak-free performance.
Identifying failure early prevents serious thermal engine damage. Look for the following symptoms:
Visible coolant residue or active dripping around the thermostat housing or water pump connections
Persistent low-coolant warnings despite regular top-offs
Physical softness, swelling, or visible surface cracking on the molded pipe
Dried white or pink crusty deposits (coolant crystallization) at connection points
If any of these indicators are present, the flange should be replaced immediately.
OEM Reference: 06K 121 132E
OE-style precision-molded construction for correct routing and clearance
Heat- and pressure-resistant construction for long service life
Matches all factory connection points and mounting locations
Prevents coolant leaks and maintains proper engine operating temperature
Direct-fit replacement — no modifications required
Replace all associated O-rings, seals, and hose clamps during installation to ensure a durable seal
Refill with VW/Audi-approved G12++ or G13 coolant only — do not mix coolant types
Perform a complete system bleed after filling to remove trapped air
Inspect nearby coolant connectors and aging hoses — replacing simultaneously prevents repeat service visits
Always verify fitment by VIN before ordering. Multiple variants and engine codes may exist within the same model year.
| Make | Model | Generation | Year Range | Engine |
|---|---|---|---|---|
| Audi | A3 | 8V | 2015–2024 | 1.8T / 2.0T L4 |
| Audi | A4 | B8 / B9 | 2013–2024 | 2.0T L4 |
| Audi | A5 | B8 / B9 | 2013–2024 | 2.0T L4 |
| Audi | Q3 | F3 | 2016–2024 | 2.0T L4 |
| Audi | Q5 | B8 / B9 | 2013–2024 | 2.0T L4 |
| Audi | TT | MK3 | 2016–2023 | 2.0T L4 |
| Volkswagen | Golf VII | MK7 / MK7.5 | 2015–2021 | 1.8T / 2.0T |
| Volkswagen | GTI | MK7 / MK7.5 | 2015–2024 | 2.0T |
| Volkswagen | Jetta | MK7 | 2019–2024 | 2.0T |
| Volkswagen | Tiguan | MQB | 2018–2024 | 2.0T |
| Volkswagen | Arteon | — | 2019–2023 | 2.0T |
| Volkswagen | Atlas | — | 2018–2020 | 2.0T |
06K 121 132E
06K 121 132J
06K 121 132
| Weight | 0.30 lbs |
|---|---|
| Dimensions | 6.0 × 4.0 × 3.0 in |
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The 5N0 122 291C is an OE-style lower radiator coolant hose adapter by VIKA, engineered for the VW Tiguan Mk1 (5N-chassis) with the 2.0L four-cylinder engine. Positioned at the front lower radiator hose junction, this coupling piece connects the lower coolant hose to the radiator outlet port, completing the primary cooling circuit return path. It serves as a cost-effective alternative to the Genuine VW lower adapter. Always confirm fitment by VIN before ordering.
The ABS Speed Sensor WHT 003 858B by German Service Tech is an OE-style replacement for select Volkswagen and Audi models. Built for plug-and-play installation with no modifications required.
The Graf VW Water Pump 026 121 005H is an OE-quality belt-driven replacement for select Volkswagen and Audi 4-cylinder engines. Built for direct installation with no modifications required.
