The 1J0 121 087D coolant hose flange by URO Parts is an OE-style direct-fit replacement for select Volkswagen 2.0L and TDI models. Precision-molded to OE dimensions for a secure, leak-free fit with no modifications required.
$7.14
The 1J0 121 087D coolant hose flange by URO Parts is an OE-style replacement fitting used on select Volkswagen models equipped with 2.0L and 1.9 TDI 4-cylinder engines. This tee-style connector serves as a junction in the engine cooling circuit, providing a secure interface between the exhaust gas cooler and heat exchanger hose to maintain proper coolant flow and stable operating temperatures. Manufactured under ISO 9000 quality standards, this URO fitting matches OE connector dimensions for a guaranteed direct-fit installation.
Plastic coolant connectors are exposed to constant heat cycles and pressurized coolant flow. Over time, the housing can become brittle, crack, or weaken at the hose barbs — leading to coolant seepage, low-coolant warnings, and potential overheating. Replacing the failing connector with this URO 1J0 121 087D fitting restores a tight, leak-free connection and reliable cooling system performance.
A failing coolant hose flange produces recognizable early warnings. Look for coolant seeping or dried residue around the connector and attached hose ends, a persistent coolant smell from the engine bay after driving, or unexplained drops in the coolant reservoir level. A low-coolant warning light may follow. In advanced cases, a cracked or split housing can cause sudden coolant loss and rapid engine overheating. Physical inspection may reveal a visibly brittle, warped, or cracked plastic body. Prompt replacement prevents further coolant loss and protects the engine from heat damage.
OEM Reference: 1J0 121 087D
Brand: URO Parts — OE-style European replacement supplier, manufactured under ISO 9000 quality standards
Tee-style design for correct fit between exhaust gas cooler and heat exchanger hose
Direct-fit replacement — no modifications required
Helps prevent coolant loss and engine overheating
Replace hose clamps if worn and inspect hose ends for swelling or internal cracking before reinstalling. Replacing aging hoses at the same time helps prevent repeat leaks. After installation, refill with VW/Audi-approved coolant and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
1J0 121 087D
URO Parts URO-010358
IMC 119 54037 001
VAICO V10-2952
1J0 121 087A
1J0 121 087B
1J0 121 087C
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 5.0 × 4.0 × 3.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 1998 | Volkswagen | Beetle | 1.9L | |
| 1999, 2001 | Volkswagen | Golf | 2.0L |
The 06A 903 315 (Gates 38018) is an OE-quality accessory drive belt idler pulley for select Volkswagen and Audi applications. Engineered to OE dimensions with a premium sealed bearing, this direct-fit pulley restores correct belt alignment and quiet, smooth accessory drive operation no modifications required.
The 5Q0 122 291AC is the OE right-side coolant bypass line adapter (T-piece) used on select 2018–2023 Volkswagen and Audi MQB-platform vehicles equipped with a 2.0L engine and manual transmission. Positioned on the passenger side of the cooling circuit, it serves as the outlet adapter for the cooling system bypass line — a distinct application from the central water pump connectors used on the same platform. Always confirm fitment by VIN before ordering, as this part is transmission-specific.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.
The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.
