The 1K0 122 291C coolant hose flange by VAICO is an OE-quality, direct-fit replacement that restores a proper, dependable connection at the coolant hose junction featuring the correct configuration to match the factory cooling system layout.
$4.80
The 1K0 122 291C coolant hose flange by VAICO is an OE-quality replacement used on a wide range of Volkswagen and Audi applications. This straight connector serves as a sealed junction point in the engine cooling circuit, securing coolant hose connections and ensuring proper coolant routing between the engine, radiator, and heater circuit to maintain stable operating temperatures and correct system pressure.
With age and repeated heat cycles, plastic coolant flanges can become brittle, warp at the sealing surface, or develop cracks at the hose connection points. This leads to coolant seepage, unexplained reservoir level drops, low-coolant warnings, and potential engine overheating. Replacing the worn unit with VAICO 1K0 122 291C restores a tight, dependable connection and reliable cooling system performance.
A failing coolant hose flange typically presents as visible coolant residue or active seepage at one of the hose connection points. The coolant reservoir may drop gradually without a clear external cause. Physical inspection of the flange often reveals surface cracking, brittleness, or deformation, which experiences greater directional stress. Left unaddressed, a fully failed flange can result in rapid coolant loss and engine overheating. Proactive replacement avoids more costly repairs.
OEM Reference: 1K0 122 291C (also: 1K0-122-291-C / 1K0.122.291.C / 1K0122291C)
Brand: VAICO – OE-quality German replacement supplier
Matches the factory hose layout and routing
Precision-molded construction for correct fit and hose alignment
Heat- and pressure-resistant materials for long service life
Direct-fit replacement; no modifications required
Replace any associated O-rings/seals and hose clamps during installation for best results. Refill with VW/Audi-approved coolant and properly bleed the cooling system after service. Inspect nearby hoses and plastic cooling fittings; replacing aging components together helps prevent repeat issues.
Always verify fitment by VIN before ordering.
V10-2769
1K0 122 291C
1K0-122-291-C
1K0.122.291.C
1K0122291C
1K0 122 101BB
1K0 122 101BC
1K0 122 101
1K0122101BB
1K0122101BC
V102769
| Weight | 0.25 lbs |
|---|---|
| Dimensions | 5.0 × 4.0 × 3.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2006-2013 | Audi | A3 | ||
| 2009-2013 | Audi | TT | 2.0L | |
| 2009, 2011-2013 | Audi | TTS | ||
| 2012-2019 | Volkswagen | Beetle | ||
| 2009-2017 | Volkswagen | CC | 2.0L | |
| 2007-2016 | Volkswagen | EOS | 3.2L V6 | |
| 2008-2014 | Volkswagen | GTI | ||
| 2010-2015 | Volkswagen | Golf | 1.8L | |
| 2010-2012 | Volkswagen | Golf | 2.5L | |
| 2012 | Volkswagen | Golf R | ||
| 2005-2018 | Volkswagen | Jetta | ||
| 2005-2009 | Volkswagen | Jetta | 2.5L | |
| 2006-2010, 2012-2013 | Volkswagen | Passat | 3.6L V6 | |
| 2006-2009 | Volkswagen | Rabbit | 2.5L | |
| 2009-2017 | Volkswagen | Tiguan |
The 022 145 276F is an INA (Schaeffler) OE-quality accessory belt tensioner pulley for select Volkswagen and Audi 3.2L and 3.6L VR6 applications. Built to factory profile with a precision sealed bearing, this direct-fit pulley restores correct belt tracking and quiet operation across the accessory drive — no modifications required.
The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.
The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Graf VW Water Pump 026 121 005H is an OE-quality belt-driven replacement for select Volkswagen and Audi 4-cylinder engines. Built for direct installation with no modifications required.
