The 4M0 121 403H Coolant Tank is a direct-fit OEM-style expansion tank engineered for Audi generation models. Furthermore, it manages thermal expansion, maintains correct system pressure, and provides the primary coolant fill point all using factory hose connections and mounting points without any modifications.
$45.00
The 4M0 121 403H Coolant Tank is a direct-fit OEM-style replacement designed to restore dependable cooling system performance on Audi vehicles. Specifically, this tank handles three critical functions within the cooling circuit — it accommodates thermal expansion and contraction of coolant, maintains correct system pressure, and serves as the primary fill point for the entire system. Because this tank is engineered to OEM dimensions, it installs directly using factory hose connections and mounting points without any modifications required. As a result, technicians and owners can complete the repair quickly and confidently.
Expansion tank failures follow predictable patterns, so recognizing the early warning signs helps prevent serious engine damage. First, a recurring low-coolant warning even after refilling strongly indicates a slow leak from the tank body or seam. Furthermore, coolant puddles or dried residue beneath the engine bay confirm active seepage. A persistent sweet coolant odor after driving is another reliable indicator. Moreover, original tanks on vehicles commonly become brittle or develop stress cracks from years of heat cycling and pressure fluctuations. In more advanced cases, air enters the cooling circuit through the compromised tank, and consequently the engine runs hotter than normal.
OEM Reference: 4M0 121 403H
Supersedes: 4M0 121 403F, 4M0 121 403D
Direct bolt-on fitment using factory hose connections and mounting points
Engineered to restore proper system pressure and coolant volume control
Before installation, confirm that all hose port positions on the new tank match those on the original unit. Next, fill the tank to the MAX mark using approved Audi G13 or G12++ coolant only — never mix coolant types, as doing so degrades inhibitor chemistry and accelerates internal corrosion. After filling, run the engine to operating temperature with the heater set to full heat, then recheck the coolant level once the system cools completely. Moreover, inspect all coolant hoses and clamps during this service and replace any that show cracking, softness, or swelling. Finally, pressure-test the cooling system after installation to confirm a fully leak-free repair before returning the vehicle to service.
Always verify fitment by VIN before ordering.
Cross Reference Numbers
4M0 121 403D
4M0 121 403F
| Weight | 1.60 lbs |
|---|---|
| Dimensions | 14 × 10 × 8 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2017-2026 | Audi | Q7 | 3.0L V6 | |
| 2017-2026 | Audi | Q7 | 3.0 TDI |
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 5Q0 122 291AC is the OE right-side coolant bypass line adapter (T-piece) used on select 2018–2023 Volkswagen and Audi MQB-platform vehicles equipped with a 2.0L engine and manual transmission. Positioned on the passenger side of the cooling circuit, it serves as the outlet adapter for the cooling system bypass line — a distinct application from the central water pump connectors used on the same platform. Always confirm fitment by VIN before ordering, as this part is transmission-specific.
The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The Graf 06K 121 011C Water Pump is an OE-quality coolant pump engineered for select Volkswagen and Audi EA888 1.8T and 2.0T TSI/TFSI engines. This direct-fit replacement features a precision aluminum housing, correct impeller geometry, and a high-quality bearing and seal assembly for factory-spec coolant circulation and long service life. Includes gasket or O-ring for a complete installation.
