The Hudson 8K0121405N Coolant Tank is a direct-fit OEM-style expansion tank engineered for select Audi applications. It manages thermal expansion, maintains correct system pressure, and serves as the primary coolant fill point — delivering reliable cooling circuit performance from day one.
$35.00
The 8K0 121 405N Coolant Tank by Hudson is a direct-fit OEM-style replacement designed to restore dependable cooling system performance on select Audi applications. Specifically, this expansion tank accommodates the thermal expansion and contraction of coolant, maintains correct system pressure, and provides the primary fill point for the entire cooling circuit. Because it is engineered to OEM dimensions, it installs directly using factory hose connections and mounting points — no modifications required.
Expansion tank failures follow recognizable patterns, so acting on early warning signs helps prevent more serious engine damage. First, a recurring low-coolant warning — even after refilling — strongly indicates a slow leak from the tank body or a seam joint. Furthermore, coolant puddles or dried residue beneath the front of the engine bay confirm active seepage. A persistent sweet coolant smell after driving is another reliable indicator. Additionally, original plastic tanks commonly develop stress cracks or become brittle due to prolonged heat cycling and pressure fluctuation. In more advanced cases, air enters the cooling circuit, and consequently the engine runs hotter than normal.
OEM Reference: 8K0 121 405N
Brand: Hudson — OE-quality cooling system replacement parts
Precision-molded to OEM dimensions for direct fitment
Correct port geometry for seamless hose and sensor integration
Engineered to restore proper system pressure and coolant volume control
Pressure-tested for verified sealing integrity
Before installation, inspect all coolant hoses and clamps and replace any that show cracking, softness, or swelling. Next, fill the tank to the MAX mark using the manufacturer-approved coolant type only — never mix coolant types, as doing so degrades inhibitor chemistry and accelerates internal corrosion. After filling, run the engine to operating temperature with the cabin heater set to full heat to purge any air from the system, then recheck the coolant level once the engine cools. Finally, clear any stored coolant-level fault codes and confirm all sensor connections are fully seated.
Always verify fitment by VIN before ordering.
Cross Reference Numbers
8K0 121 405F
8K0 121 405H
8K0 121 405Q
8K0 121 405R
8K0 121 405S
CRT 169 000S
| Weight | 1.45 lbs |
|---|---|
| Dimensions | 11.5 × 11 × 5.5 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2009 | Audi | A4 | ||
| 2008-2010 | Audi | A5 | ||
| 2009-2017 | Audi | Q5 | ||
| 2010-2016 | Audi | S4 | ||
| 2010-2017 | Audi | S5 | ||
| 2014-2017 | Audi | SQ5 |
The 06K 121 143 is an OE-spec coolant hose adapter for select Volkswagen and Audi EA888 1.8T and 2.0T applications. Precision-molded to factory specifications, this direct-fit replacement restores a factory-tight seal at critical coolant junctions — no modifications required. Includes O-ring.
The 06H 903 341D is an URO Parts OE-style accessory belt idler pulley for select Audi B8 platform vehicles equipped with the 2.0T engine. Built to factory profile with a high-quality sealed bearing, this direct-fit pulley restores proper belt alignment and quiet accessory drive operation — no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The ATE ABS Speed Sensor WHT003859 is a premium OE-quality replacement for select Audi and Volkswagen models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a true plug-and-play installation.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
