Senses engine oil pressure for the gauge and ECU
$18.95
The oil pressure sender monitors the current oil pressure in the engine and transmits the signal to both the cluster gauge and ECU.
A simple way to diagnose a faulty sender: with the ignition on and engine off, there should be no pressure reading displayed. If a reading appears without the engine running, the sender is defective and should be replaced.
This specific unit is rated at 0.75–7.05 BAR and comes in Gray. Note: Some vehicles use two different oil pressure senders—verify your application before purchase.
JC PRONTEZZA supplies OEM-quality oil pressure senders to maintain accurate system monitoring and engine protection.
OE Part Number: 038 919 081 P
| Weight | .05 lbs |
|---|---|
| Dimensions | 2 × 1.5 × 1.5 in |
| Mfg Part # | 038919081P |
| Make | Year | Model | Submodel | Engine | Notes |
|---|---|---|---|---|---|
| Audi | A7 | C7 | 3.0T | Use vehicle selector to confirm fitment | |
| Audi | B8 S4 | Quattro | 3.0T | Use vehicle selector to confirm fitment | |
| Audi | B8 S5 | Quattro | 3.0T Coupe | Use vehicle selector to confirm fitment | |
| Audi | B8 SQ5 | Quattro | 3.0T | Use vehicle selector to confirm fitment | |
| Audi | C6 A6 | All | V6 3.0T | For models with 1-pin oil pressure sensors - Please check existing prior to ordering | |
| Audi | Q5 | Quattro | 3.0T | Use vehicle selector to confirm fitment | |
| Audi | Q7 | All | 3.0T | Use vehicle selector to confirm fitment | |
| Volkswagen | CC | 4Motion | VR6 | Use vehicle selector to confirm fitment | |
| Volkswagen | CC | FWD | VR6 | Use vehicle selector to confirm fitment |
The Service Tech ABS Speed Sensor WHT003858B is a cost-effective, OE-style replacement for select Audi and Volkswagen models. As an updated revision of the WHT003858, it delivers precise wheel-speed data to ABS, ESP, and traction control systems — with plug-and-play installation and no modifications required.
The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.
Pressure switch located on the oil cooler bracket. .55-.85 BAR
Bolt in style, check style before ordering
Sends signal for vehicle speed to the transmission control module
