The 06A 121 132AP coolant flange by URO Parts is an OE-style direct-fit replacement for VW Golf IV, Jetta IV, and Audi TT MKI 1.8T applications. Manufactured under ISO 9000 quality standards, this 4-outlet flange with sensor hole includes an O-ring for a complete, leak-free installation.
$15.00
The 06A 121 132AP coolant flange by URO Parts is an OE-style replacement used on select Volkswagen and Audi 1.8T applications. This 4-outlet flange with sensor hole mounts on the driver side of the cylinder head, providing properly aligned connection points for multiple coolant hoses to route coolant between the cylinder head, radiator circuit, and heater system to maintain stable operating temperature. Manufactured under ISO 9000 quality standards, URO Parts produces this flange to meet or exceed OEM specifications, and the part includes an O-ring for a complete installation.
Coolant flanges are a common leak point as they age. Constant heat cycling and cooling system pressure cause the original plastic housing to become brittle, warp, or crack — leading to coolant seepage, dried residue around the flange area, low-coolant warnings, and potential overheating. Replacing the failing unit with this URO 06A 121 132AP flange restores a tight seal and dependable coolant flow.
Early signs of a failing coolant flange include visible coolant seepage or dried pink/orange residue around the flange body and hose connections on the driver side of the cylinder head. A persistent coolant odor after driving, unexplained drops in coolant reservoir level, or a low-coolant warning light are additional indicators. Physical inspection may reveal a visibly brittle, cracked, or warped plastic housing. In advanced cases, a failed flange can cause sudden coolant loss and rapid engine overheating. Addressing these symptoms promptly protects the engine from heat-related damage.
OEM Reference: 06A 121 132AP; also replaces 06A 121 132D, 06A 121 132G, 06A 121 132Q
Brand: URO Parts — OE-style European replacement supplier; manufactured under ISO 9000 quality standards
4-outlet design with sensor hole; mounts on the driver side of the cylinder head
Includes O-ring for a complete, leak-free installation
Durable composite construction designed for coolant and heat exposure
Precision-molded ports for correct hose routing and factory-style fit
Helps prevent leaks and maintains proper engine temperature
Install the included O-ring during assembly and replace any related sensor O-rings at the same time. Use new hose clamps if the originals are weak or corroded. After installation, refill with VW/Audi-approved coolant and properly bleed the cooling system to remove trapped air before returning the vehicle to service.
Always verify fitment by VIN before ordering.
06A 121 132AP
06A 121 132D
06A 121 132G
06A 121 132Q
URO Parts URO-000189
| Weight | 0.55 lbs |
|---|---|
| Dimensions | 7.0 × 6.0 × 4.0 in |
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2000-2002 | Audi | TT | 1.8L | |
| 2000-2006 | Volkswagen | Golf | 1.8L | |
| 2000-2006 | Volkswagen | Jetta | 1.8L |
The 03L 145 276 is an OE-quality accessory belt idler pulley for select Volkswagen and Audi 2.0 TDI applications. Built to factory dimensions with a sealed bearing, this direct-fit pulley restores correct belt alignment and quiet accessory drive operation — no modifications required.
The 5Q0 122 291DA is the OE 3-port coolant hose connector located at the water pump on select Volkswagen and Audi MQB-platform vehicles. It serves as the central junction point between the coolant hoses routing to the radiator, heater circuit, and engine — covering a wide range of 1.8T and 2.0T turbocharged applications from Golf and GTI to Audi A3, TT, and Q3. This part is superseded by 5Q0 122 291AL, which is the current OE replacement. Always confirm fitment by VIN before ordering.
The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.
The BG Water Pump Thermostat 04E 121 600BD is an OEM-spec integrated cooling module for select Volkswagen and Audi EA211 1.2T and 1.4T TSI/TFSI engines. Direct-fit with no modifications required.
The Graf 06H 121 026ED Water Pump and thermostat assembly is an OE-spec integrated cooling module featuring a robust aluminum housing engineered for select Volkswagen and Audi EA888 2.0T TSI/TFSI engines. The aluminum construction eliminates the warping and cracking common to original plastic designs, restoring factory-spec coolant circulation and precise temperature regulation. Includes all required O-rings and seals for a complete installation.
