





Eldor 06E905115G Ignition Coil provides reliable high-voltage spark delivery for compatible direct-ignition engine systems.
$45.00
2 in stock
The 06E905115G Eldor Ignition Coil delivers high-voltage electrical energy directly to the spark plug to initiate combustion. This direct-ignition component mounts directly above the spark plug, eliminating the need for conventional spark plug wires. Consequently, it supports consistent spark delivery, smoother engine starting, and stable idling across all operating conditions.
Eldor is a premier original equipment manufacturer renowned for advanced ignition technology. Therefore, this replacement coil provides factory-grade reliability while withstanding severe engine-bay heat cycles and mechanical vibrations.
Modern direct-injection engines demand precise, high-energy ignition timing to maintain clean and efficient combustion cycles. Over extended mileage, however, internal coil windings and insulation degrade from constant thermal expansion and high electrical loads. Consequently, an aging coil begins to deliver weak or intermittent spark output.
A failing ignition coil causes unburned fuel to enter the exhaust stream, which can rapidly overheat and degrade the catalytic converter. Furthermore, persistent misfires lead to noticeable power loss, increased tailpipe emissions, and decreased fuel efficiency. Installing a fresh 06E905115G Eldor Ignition Coil restores proper cylinder combustion and safeguards sensitive downstream exhaust components.
Inspect your ignition system for these common symptoms associated with a failing coil:
An illuminated check engine light accompanied by single or multiple cylinder misfire codes.
Noticeable engine hesitation, stumbling, or jerking under moderate to heavy acceleration.
A rough, erratic, or vibrating idle while stopped in gear.
Reduced overall engine output and sluggish throttle response.
Increased fuel consumption during routine driving conditions.
Difficulty starting or prolonged engine cranking times.
Visible hairline cracks, heat discoloration, or carbon tracking along the coil body.
Corroded, loose, or oil-fouled electrical connector pins.
OE Part Number: 06E 905 115 G
Manufacturer: Eldor
Design: Direct-fit pencil ignition coil for direct-to-plug mounting.
Function: Transforms low primary voltage into high-voltage electrical spark.
Durability: Built with high-grade thermal resin to resist extreme underhood temperatures.
Performance: Provides rapid rise time and consistent spark energy across the full RPM range.
Installation: Direct OEM replacement ensuring plug-and-play electrical connectivity.
Always verify fitment by VIN before ordering. Before replacing the 06E905115G Eldor Ignition Coil, scan the engine control module to identify specific misfiring cylinders. Additionally, inspect the spark plug well for any oil accumulation caused by a leaking valve cover gasket.
Always verify fitment by VIN before ordering. Compatibility depends on engine code, model year, cylinder count, and the original installed part number.
06E 905 115 G
06E905115G
06E 905 115 E
06E 905 115 F
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2006-2008 | Audi | A4 | 3.2L V6 | |
| 2010 | Audi | A5 | 3.2L V6 | |
| 2006-2011 | Audi | A6 | 3.2L V6 | |
| 2012-2018 | Audi | A7 | 3.0L V6 | |
| 2013, 2015-2018 | Audi | A8 | 3.0L V6 | |
| 2007-2012 | Audi | A8 | 4.2L V8 | |
| 2013-2017 | Audi | Q5 | 3.0L V6 | |
| 2010-2012 | Audi | Q5 | 3.2L V6 | |
| 2011-2015, 2017-2019 | Audi | Q7 | 3.0L V6 | |
| 2007-2010 | Audi | Q7 | 4.2L V8 | |
| 2009-2012, 2014-2015, 2017 | Audi | R8 | 4.2L V8 | |
| 2010-2011, 2014-2015, 2017 | Audi | R8 | 5.2L V10 | |
| 2010-2016 | Audi | S4 | 3.0L V6 | |
| 2008-2017 | Audi | S5 | 3.0L V6 | |
| 2007-2011 | Audi | S6 | ||
| 2007-2009 | Audi | S8 | ||
| 2014-2017 | Audi | SQ5 | 3.0L V6 | |
| 2011-2018 | Porsche | Cayenne | 3.0L V6 | |
| 2012-2016 | Porsche | Panamera | 3.0L V6 | |
| 2007-2009, 2011-2015 | Volkswagen | Touareg | 3.0L V6 |


The 8W0 122 293A is a Genuine Audi OE upper coolant hose coupling for the Audi A4 (B9), A4 allroad, A5, and A5 Sportback equipped with the 2.0L 45 TFSI petrol engine (2017–2020). Positioned at the water pump housing, this flange connects the upper radiator coolant hose and includes a C-clip and seal in the box. Because this coupling is a single-use component, always install a new unit whenever the upper coolant hose is disturbed — no modifications required.


The 6Q0 122 291F is a Febi Bilstein OE-quality lower radiator coolant hose flange for Volkswagen and Audi Mk4-platform models — including the Golf, Jetta, Beetle, Audi A3, and TT across 1.8T, 2.0L, 1.9 TDI, and 2.8 VR6 applications (1998–2010). This precision-molded flange provides the sealed junction for the lower coolant hose and features an integrated coolant drain port, making it a direct-fit replacement to restore leak-free cooling system operation with no modifications required.

The 5N0 122 291 is an OE-style upper radiator coolant hose adapter by Burgaflex, engineered for the VW Tiguan Mk1 (5N-chassis) equipped with the 2.0L EA113/EA888 engine. Positioned at the front upper radiator hose junction, this coupling piece — supplied with its C-clip and seal — provides a secure, leak-free connection between the upper coolant hose and the radiator inlet. It serves as a cost-effective alternative to the Genuine VW part while maintaining OE-style fit and performance. Always confirm fitment by VIN before ordering.


The Service Tech ABS Speed Sensor WHT003860 is a cost-effective, OE-style replacement for select Volkswagen and Audi models. It delivers precise wheel-speed data to your ABS, ESP, and traction control systems with a plug-and-play installation and no modifications required.


The Service Tech ABS Speed Sensor WHT003858 is a cost-effective, OE-style replacement for select Audi and Volkswagen models. It delivers accurate wheel-speed data to your ABS, ESP, and traction control systems — restoring full safety-system performance with a straightforward plug-and-play installation.